Figure 3-4. System Information - NETGEAR ProSafe FSM7328S Operating Instructions Manual

Managed fast ethernet switch

Hide thumbs Also See for ProSafe FSM7328S:

Table of Contents

4. Hit the return key, and the below screen should appear.

5. The login name is "admin". And there is no password assigned. We strongly recommend you enable

password for admin access to secure access to the switch management function. After successful

management CPU's IP address. The switch is shipped with DHCP as default to receive its IP address.

To manually set a static IP address, you must first disable DHCP as follows:

(FSM7328S ) >en

Password: <just hit enter>

(FSM7328S )# network protocol none

Changing protocol mode will reset ip configuration.

Are you sure you want to continue? (y/n)y

After system prompt return, enter the following command

( FSM7328S ) # network parms 192.168.1.100 255.255.255.0 192.168.1.1

The example above uses "192.168.1.100" as IP address, and "192.168.1.1" as gateway IP address. You

Figure 3-4. System Information.

Page 17 of 24

Table of Contents