Sony AXS-R7 Service Manual page 59

7. Disconnect the fine-wire coaxial cables, and then remove the screws.
(1) Open the IF-1308 board assembly in the direction of the arrow.
(2) Disconnect the fine-wire coaxial cable from the connector (CN102) on the IF-1308 board.
(3) Remove the five screws.
IF-1308 board assembly
Arrangement of harnesses
DC-181 board
Connector
(CN202)
Harness holder G
Rib
Note
When connecting the fine-wire coaxial cable, observe the following instructions.
• Hook the fine-wire coaxial cable to the rib of the harness holder G.
• Pass the harness on the right side of the connector (CN202) on the DC-181 board.
AXS-R7
IF-1308 board
PSW2 x 5
IF-1308 board
Fine-wire coaxial
cable
Fine-wire coaxial
cable
Contact (gold)
CN102
2-29