LG SC9S Owner's Manual page 9

Connecting the rear speakers to the wireless receiver (SPQ8-S, sold
separately)
Automatic connection
After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the
sound bar to the wireless receiver in the following order.
a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right). Connect the
black striped cable to the negative terminal and the other cable to the positive terminal.
b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.
Receiver Terminal Colour
Blue
Grey
c Plug the power cable into the wireless receiver.
d Plug the power cable connected to the wireless receiver into an outlet.
e Press the Power
f When the connection is automatically established, you will see the LED on the front of the wireless receiver
light up in green.
Note
• Please only use the speakers provided with the product. Using other speakers may cause malfunction.
• Connect the speaker cables to the corresponding terminals. Connect to the positive cable to the positive
terminal and the negative cable to the negative terminal. An incorrectly connected cable will distort the sound
or produce no bass.
• Connect the product to the speakers and cables provided at the time of product purchase.
- If you connect the product to speakers or cables other than those provided at the time of product purchase,
there can be a deterioration of sound quality or a speaker malfunction.
• When you connect speakers to the product, connect only one speaker to the output port that fits the speaker.
- If you connect multiple speakers to one output port, it may cause a product or speaker malfunction.
Speaker Position
L Left rear
R Right rear
button on the sound bar to turn it on.
9