Table of Contents
Advertisement
Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Before each use or daily
Every 25 hours
Every 200 hours
Before storage
CAUTION
If you leave the key in the ignition switch, someone could start the engine. Accidental starting of the
engine could seriously injure you or other bystanders.
Remove the key from the ignition switch before you do any maintenance.
Greasing the Plow
Service Interval: Before each use or daily
Before storage
Grease 6 fittings, as shown in Figure 10 through
Figure 13, every 8 operating hours. Grease all fittings
immediately after every washing.
Grease Type: General-purpose grease
1. Stop the engine and remove the key.
2. Clean the grease fittings with a rag.
3. Connect a grease gun to each fitting.
4. Pump grease into the fittings until grease begins to
ooze out of the bearings.
5. Wipe up any excess grease.
Figure 10
Maintenance Procedure
• Grease the plow.
• Check the gear lube level.
• Change the gear lube.
• Grease the plow.
• Check the gear lube level.
• Paint chipped surfaces.
10
Figure 11
Figure 12
Advertisement
Table of Contents
