A Note To Your Plumber - LifeSource Premier PowerPac 2250SE Owner's Manual

A NOTE TO YOUR PLUMBER

This page includes tips and important reminders. We recommend customers share
this page with outside plumbers doing work in the home. The following information
will ensure that your LifeSource service is not interrupted.
Important Reminders
• This system requires the fabrication of a 3-way valve bypass. This allows the
system to easily switch to bypass if service or relocation is necessary.
• A dual-union ball-valve is used on the inlet and outlet to isolate the tank for
servicing.
• The ScaleSolver
®
conventional water softener. Both the inlet and outlet are clearly marked on the
tank. THE SYSTEM WILL FAIL AND WARRANTY WILL BE VOIDED IF INSTALLED
INCORRECTLY.
• The ScaleSolver unit with PowerTAC is recommended by most tankless water
heater manufacturers.
• Install using schedule 80 nipples and stainless steel flex lines for inlet and outlet.
In BYPASS Position
unit operates in an UPFLOW mode which is opposite of a
Figure 1
In SERVICE Position
Figure 2
4