GMC HUMMER EV 2023 Owner's Manual page 118

DIC Info Pages
The following is the list of all possible DIC
info page displays. Some may not be
available for your particular vehicle. Some
items may not be turned on by default but
can be turned on through the Options app.
See DIC Info Page Options earlier in this
section.
Trip 1 or Trip 2 and Average Efficiency : The
Trip display shows the current distance
traveled, in either kilometers (km) or
miles (mi), since the trip odometer was last
reset.
The Average Efficiency shows the
approximate average kilometers per kilowatt
hour kWh (km/kWh) or miles per kilowatt
hour kWh(mi/kWh). This number is
calculated based on the number of km/kWh
or mi/kWh recorded since the last time this
menu item was reset. This number only
reflects the approximate average electrical
energy economy that the vehicle has at that
moment, and changes as driving conditions
change.
The values can be reset by pressing and
holding the / switch while either the
Trip 1 or the Trip 2 display is active.
Timer : To start the timer, press the
switch while this display is active. The
display will show the amount of time that
has passed since the timer was last reset. To
stop the timer, press the /
briefly while this display is active and the
timer is running. To reset the timer to zero,
press and hold the / switch while
this display is active.
Tire Pressure : Shows the approximate
pressures of all four tires. Tire pressure is
displayed in either kilopascal (kPa) or in
pounds per square inch (psi). If the pressure
is low, the value for that tire is shown in
amber. Pressing and holding the
switch displays a series of alerts for Tire
Manual Learning.
Driver Assistance : If equipped, shows
information for Adaptive Cruise Control
(ACC), Follow Distance, Lane Keep Assist
(LKA) and Forward Collision Alert (FCA).
Trailer Brake : On vehicles with the
Integrated Trailer Brake Control (ITBC)
system, this display appears in the DIC.
TRAILER GAIN shows the trailer gain setting.
This setting can be adjusted from 0.0 to 10.0
with either a trailer connected or
disconnected.
Instruments and Controls
TRAILER OUTPUT shows the power output to
/
the trailer any time a trailer with electric
brakes is connected. Output is displayed as a
bar graph. Dotted lines may appear in the
OUTPUT display if a trailer is not connected.
switch
Off Road : Displays vehicle pitch and roll
information, road wheel angle, and
four-wheel drive (e4WD) status.
Energy Usage : Shows energy usage of the
Driving, Remote Start, Climate and
Conditioning vehicle systems as percentages
of overall vehicle energy use.
Suspension Travel : Shows a graphical
representation of the current wheel travel
/ upward or downward for all four wheels as
the vehicle travels over uneven terrain. The
wheel color shown on this display becomes
more saturated as the suspension reaches
max upward or downward travel. When ride
height is adjusted up or down the wheel
positions in this graphic shows above or
below normal ride height on level ground.
Blank Page : No information is displayed in
the cluster info display areas.
Info Page Options : Press the
switch to select the items to be displayed in
the Info app. See Driver Information Center
(DIC) 0 116.
117
/