Panasonic SA-HT280 Service Manual page 3

Total harmonic distortion
S/N
Frequency response
Alternate channel selectivity
Capture ratio
Image rejection at 98MHz
Spurious response rejection at
98MHz
AM suppression
Stereo separation
Antenna terminal
Frequency range / Sensitivity /
Selectivity / IF rejection at 1000kHz
Output voltage at 1V input
Maximum input voltage / Input/
output impedance
Power supply / Power consumption
/ Dimensions (W x H x D)
Mass
Power consumption in standby /
mode:
Notes:
2000 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.
MONO / STEREO
MONO / STEREO
1kHz / 10kHz
AM TUNER SECTION
VIDEO SECTION
(unbalanced)
GENERAL
1. Specifications are subject to change without notice. / Mass and
dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum /
analyzer.
*
Manufactured under license from Dolby Laboratories
1
Licensing / Corporation. "Dolby", the double-D symbol and
"PRO LOGIC" / are trade marks of Dolby Laboratories
Licensing Corporation.
*
This product is manufactured under license from DTS, / Inc.
2
of America.
0.2% / 0.3%
73dB / 67dB
20Hz - 15kHz, +1dB, -2dB
65dB
1.5dB
40dB
75dB
50dB
40dB / 30dB
75 (unbalanced)
530 - 1710kHz / 20 V,
330 V/m / 55dB / 50dB
1±0.1Vp-p
1.5Vp-p / 75
AC120V, 60Hz / 450VA,
350W / 430 x 158 x 320.5mm
/ (16-15/16"x6-7/32"x12-5/
8")
10.2kg (22.4lb.)
1W