Identifying Physical Irf Ports On The Member Switches - H3C S5560X-HI Series Installation Manual

Figure4-3 IRF fabric in ring topology
1
2
3

Identifying physical IRF ports on the member switches

Identify the physical IRF ports on the member switches according to your topology and connection
scheme.
Table4-1 shows the physical ports that can be used for IRF connection and the port use restrictions.
Table4-1 Candidate physical IRF ports and their use restrictions
Chassis
S5560X-34C-HI
S5560X-58C-HI
S5560X-30F-HI
S5560X-54F-HI
IRF-port1
IRF-port2
IRF-port1
2
Candidate physical IRF ports
•
6 × SFP+ ports on the front panel
•
The following ports provided on the
expansion modules:
5G/2.5G/1000BASE-T

autosensing Ethernet ports
10G/5G/2.5G/1000BASE-T

autosensing Ethernet ports
SFP+ ports

SFP28 ports

QSFP+ ports

•
6 × SFP+ ports on the front panel
•
2 × QSFP+ ports on the front panel
•
The following ports provided on the
expansion modules:
5G/2.5G/1000BASE-T

autosensing Ethernet ports
10G/5G/2.5G/1000BASE-T

autosensing Ethernet ports
SFP+ ports

SFP28 ports

QSFP+ ports

4-37
IRF-port2
1
IRF-port1
IRF-port2
3
Use restrictions
•
Physical ports on interface
modules and the front panel can be
bound to the same IRF port.
•
All physical ports to be bound to an
IRF port must have the same data
rate.
•
A QSFP+ port that is split into four
virtual SFP+ ports cannot be used
as a physical IRF port.