Hyundai Grand i10 NIOS Owner's Manual page 193

WINDSHIELD DEFROSTING AND DEFOGGING
WARNING
Do not use the or
during cooling operation in extremely
humid weather. The difference
between the temperature of the
outside air and that of the windshield
could cause the outer surface of the
windshield to fog up, causing loss of
visibility. Set the mode selection to the
position and fan speed control to a
lower speed.
• For maximum defrosting, set the
temperature control to the extreme
right/hot position and the fan speed
control to the highest speed.
• If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
• Before driving, clear all snow and ice
from the windshield, rear window,
outside rear view mirrors, and all side
windows.
• Clear all snow and ice from the hood
and air inlet at the buttom of the
windshield.
Information
i
If the engine temperature is still cold after
starting, then a brief engine warm up
period may be required for the vented air
flow to become warm or hot.
Manual climate control system
To defog inside windshield
position
1. Select desired fan speed.
2. Select desired temperature.
3. Select the
4. The outside (fresh) air will be selected
If the air conditioning and outside (fresh)
mode are not selected automatically,
press the corresponding button
manually.
or
automatically. Additionally, the
air conditioning will automatically
operate if the mode is selected to the
or position.
05
OAI3059108 OAI3059108
position.
5-65