Advertisement
Quick Links
NEO PRODUCTS - WORK INSTRUCTION
BETMAKERS GLOBAL TOTE BENCH
NUMBER
15701-GA001
DESCRIPTION
BETMAKERS GLOBAL
TOTE TABLE
ASSEMBLY
ITEMS NEEDED TO PERFORM THIS TASK
HAND TOOLS ONLY
#2 PHILLIPS HEAD SCREWDRIVER
Allen Keys 4mm – Gold Colour (Provided)
Allen Keys 5mm – Black Colour (Provided)
ITEM
STOCK CODE
#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
SCA 10-18PXMZ
19
20
21
WORK INSTRUCTION_BETMAKERS GLOBAL TOT BENCH_Customer Edition_RevA
ISSUE
A
Initial Production Release
B
C
D
E
Side of the Table with Slot
Table Side with Logo
White side of the table with a slot
Internal wooden support
Hex Socket Screw (long)
Washer for the long screws
Countersunk Hex Socket Screw
SCREW PAN 10AB x 3/4
PAN M6x16 Phillips Head
CHANGE
DESCRIPTION
Back side of table
Top of the table
Top of side table
Side leg of the table
Support Plank
Metal Plate
Head Rods
Wooden Dowel pins
Cam
Spring Washers
L-Brackets
Velcro
DATE
ISSUED BY
15/09/2022
MP
QTY
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
33.00
33.00
32.00
6.00
6.00
7.00
7.00
17.00
4.00
1.00
6.00
Page 1 of 21
Advertisement
Summary of Contents for NEO BETMAKERS GLOBAL TOTE BENCH
- Page 1 NEO PRODUCTS - WORK INSTRUCTION BETMAKERS GLOBAL TOTE BENCH NUMBER ISSUE CHANGE DATE ISSUED BY 15701-GA001 Initial Production Release 15/09/2022 DESCRIPTION BETMAKERS GLOBAL TOTE TABLE ASSEMBLY ITEMS NEEDED TO PERFORM THIS TASK HAND TOOLS ONLY #2 PHILLIPS HEAD SCREWDRIVER Allen Keys 4mm – Gold Colour (Provided) Allen Keys 5mm –...
- Page 2 15701 BETMAKERS GLOBAL TOT BENCH • Lift the boxes or its contents with care. • Take care when unpacking the contents and placing on the ground. WORK INSTRUCTION_BETMAKERS GLOBAL TOT BENCH_Customer Edition_RevA Page 2 of 21...
- Page 3 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION This assembly requires contents from two boxes: - BOX 1 of 2. - BOX 2 of 2. Make sure two boxes are available before starting the assembly. Select and open BOX 2 of 2. WORK INSTRUCTION_BETMAKERS GLOBAL TOT BENCH_Customer Edition_RevA Page 3 of 21...
- Page 4 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Open the Hardware pack Brackets/ Power contained within BOX 2 of 2: Velcro Hardware pack contains: - 33x Wooden Dowel Pins (a) - 33x Head Rods (b) - 32x Cams (c) - 7x Countersunk Hex Socket Screw (d) Store - 5x Hex Socket Screw –...
- Page 5 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Remove the Side of the Table with Slot (1) from supplier packaging, BOX 2 of 2. Slot Select 4x Head Rods from Hardware Pack. Install 4x Head Rods onto Side of the Table with Slot (1), position shown.
- Page 6 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Install Thread of Head Rod into wood. TFasten the 4x Head Rods using a #2 Phillips Head Screw Driver. Select 4x Wooden Dowel Pins from Hardware Pack. Retrieve Table Side with Logo (2) from supplier packaging, BOX 2 of 2.
- Page 7 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Install 4x Wooden Dowel Pins onto the RIGHT-HAND Side on Table Side with Logo (2), in hole positions shown. LOGO Push firmly with hand to ensure correct fitment. WORK INSTRUCTION_BETMAKERS GLOBAL TOT BENCH_Customer Edition_RevA Page 7 of 21...
- Page 8 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Install Table Side with Logo (2) onto the Side of the Table with Slot (1). Note: Ensure the Cam Rods are all straight and are not bent when joining the sides. Ensure the Head Rods and the Wooden Dowel Pins intersect and fit properly.
- Page 9 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Install the Cams into the position above the Head Rods as shown. Make sure the arrow on the Cam points in the direction of the Head Rod. Note: If the Head Rod does not engage with the Cam during fitment, complete the following...
- Page 10 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Repeat the installation process of 4x Head Rods for the opposite side of the Side of the Table with (1). Slot Remove the Back side of table (3) from the packaging. Install Wooden Dowel Pins onto the Back side of table (3).
- Page 11 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Remove White side of the table with a slot (4) from the supplier packaging, BOX 1 of 2. Install 8x Head Rods onto the white side of the table with a slot (4) as shown.
- Page 12 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Turn the assembly into the position shown. Install 11x Wooden Dowel Pins on the assembly as shown. Once the outside of table is complete slide in the Internal wooden support (5) through the slots on Side of the Table with Slot (1) and White side of the table...
- Page 13 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Install the Top of the table (6) onto the table side with a slot in it (1), Table Side with Logo (2), Back side of table (3), White side of the table with a slot (4) and Internal wooden support (5) by repeating the process of installing Cams and tightening them.
- Page 14 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Assemble Top of side table (7) and Side leg of the table (8) using the previous process by installing Cams and Head Rods. Note: If the Head Rod does not engage with the Cam during fitment, refer to Step 14 for adjustment process.
- Page 15 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Install the Support Plank’s (9) plain face of the plank faces away from the U-shaped cut. Make sure the support plank (9) is in line with the edge of the Top of side table (7). Remove the L-Brackets (k) and the 17x Self tapered PAN 10ABx3/4 Screws (m) from the...
- Page 16 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Place the L-Brackets on the edge of Top of side table (7) and Side leg of the table (8) and use 8x PAN 10AB x 3/4 screws and fasten using #2 Phillips Head Screwdriver.
- Page 17 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Align the side table assembly to the table side with a slot in it (1). Select 6x Long Hex Socket Screw and Washers from packaging. Fix the side table assembly to the main table.
- Page 18 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Use the Allen Key 5mm (provided) to tighten these Socket Screw Ensure that the side table is firmly fixed, square & aligned on all floor contact surface. WORK INSTRUCTION_BETMAKERS GLOBAL TOT BENCH_Customer Edition_RevA Page 18 of 21...
- Page 19 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Install the Power Supply to the LOGO and pull the wire through the hole provided. Use the Velcro provided to attach the adapter to the internal wooden support (5). WORK INSTRUCTION_BETMAKERS GLOBAL TOT BENCH_Customer Edition_RevA Page 19 of 21...
- Page 20 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Plug in the adapter and test if the LED illuminates. Remove the Metal Plate from the supplier packaging. Install the Metal Plate (10) onto the Internal wooden support (5) as shown in the image. WORK INSTRUCTION_BETMAKERS GLOBAL TOT BENCH_Customer Edition_RevA Page 20 of 21...
- Page 21 15701 BETMAKERS GLOBAL TOT BENCH STEP IMAGE DESCRIPTION Use 6x Countersunk Hex Socket Screw (d) to secure the Metal Plate (10) to the Internal wooden support (5) using the Allen Key – 4mm provided. Remove the Mounting Bracket from packaging. Install the Mounting Bracket on to the Metal Plate (10) using 5x PAN M6x16 Phillips Head (n) provided...