Toyota Tacoma 1996 Instruction Manual page 71

Table of Contents

Advertisement

(d) Shifting procedure
(lever type with manual
transmission)
SHIFTING BETWEEN "H2" AND "H4"
With free-wheeling hubs
To shift from "H2" to "H4", move the
front drive control lever. Also, engage
both the free-wheeling hubs.
This can be done when the vehicle is
stopped, or moving straight ahead at
speeds of 40 km/h (25 mph) or less. You
need not depress the clutch pedal. If you
have trouble shifting, depress or release
the accelerator pedal momentarily while
pushing the front drive control lever.
CAUTION
!
S Never move the front drive control
lever if wheels are slipping. Stop
the slipping or spinning before
shifting.
S Never drive with only one hub en-
gaged.
To shift from "H4" to "H2", simply move
the front drive control lever. Also, disen-
gage both the free-wheeling hubs for con-
tinued "H2" use.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
If the indicator light does not go off when
you shift the transfer into "H2", drive
straight ahead while accelerating or de-
celerating, or drive in reverse.
With A.D.D.
To shift from "H2" to "H4", reduce your
speed to less than 80 km/h (50 mph) and
move the front drive control lever. You
need not depress the clutch pedal.
If you have trouble shifting in cold
weather, reduce your speed or stop the
vehicle and reshift.
CAUTION
!
Never move the front drive control
lever if wheels are slipping. Stop the
slipping or spinning before shifting.
To shift from "H4" to "H2", simply move
the front drive control lever.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
If the indicator light does not go off when
you shift the transfer into "H2", drive
straight ahead while accelerating or de-
celerating, or drive in reverse.
SHIFTING BETWEEN "H4" AND "L4"
To shift from "H4" to "L4", stop the ve-
hicle or reduce your speed to less than 8
km/h (5 mph). With your foot off the accel-
erator pedal, depress the clutch pedal and
move the front drive control lever.
To shift from "L4" to "H4", depress the
clutch pedal and move the front drive con-
trol lever.
This can be done at any vehicle speed.
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents