Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Nady Systems Manuals
  4. Stereo System
  5. RPA-6
  6. Owner's manual

Nady Systems RPA-6 Owner's Manual

6 channel portable sound system
Hide thumbs

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
RPA-6
6 CHANNEL PORTABLE SOUND SYSTEM

Advertisement

loading

Related Manuals for Nady Systems RPA-6

Summary of Contents for Nady Systems RPA-6

  • Page 1 OWNER’S MANUAL RPA-6 6 CHANNEL PORTABLE SOUND SYSTEM...

  • Page 2: Table Of Contents

    This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new NADY AUDIO RPA-6 has superior performance and greater flexibility than any other portable sound systems in its price range. Please read this manual carefully to get the most out of your new unit.

  • Page 3: Warning

    ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR IMPORTANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: Read all instructions before using the product. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.).

  • Page 4: Installation

    (Note: Nady Systems is not responsible for shipping damage. If the unit is damaged, do not return to us, but notify your dealer and the shipping company immediately to make a claim.

  • Page 5: Front Panel Controls & Connections

    FRONT PANEL CONTROLS & CONNECTIONS (11) (12) (13) FRONT PANEL Note: 1 through 6 below are referenced to Channel 1. The other 5 channels are identical. (1) GAIN CONTROL The Gain Control determines the proportion of the channel signal in the mix, (2) REVERB CONTROL The Reverb Control adjusts the level of signal sent by each channel to the internal Reverb DSP (Digital Sound Processor).

  • Page 6: Rear Panel Controls & Connections

    (14) (15) EFFECTS RETURN This input can be used to return the effected signal into the RPA-6 or it can be used as an auxiliary input. The input signal can be adjusted by the Master Volume and the unit the return jack is connected to.

  • Page 7: Specifications

    SPECIFICATIONS AMPLIFIER AND SPEAKER Power ...130W RMS @ 4 Ω S/N Ratio ... >115dB THD Power output, 20Hz to 20KHz ... <0.1% Speaker ...8 Ω Tweeter type ... Piezoelectric Horn Woofer ... 12" FREQUENCY RESPONSE (Mic input to output) Line level o/p @ +4dBu into 600 Ω ...20Hz- 20KHz ±3dB Power amp o/p 1 watt into 8 Ω...
  • Page 8 SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product.