Related Manuals for Nady Systems PCL-800
Summary of Contents for Nady Systems PCL-800
- Page 1 PULL PULL REAR OUTLETS RACK LIGHTS DIMMER OVER STANDARD VOLTAGE VOLTAGE POWER CONDITIONER & LIGHT MODULE 1800 WATTS CAPACITY...
-
Page 2: Table Of Contents
Read this manual carefully to get the most out of your new unit. Thanks for selecting NADY AUDIO for your choice in power conditioners. PCL-800 Power conditioner... -
Page 4: Controls, Functions, And
FRONT PANEL RACK LIGHTS DIMMER 1. POWER SWITCH Outlet switch (with built-in LED ON indicator) activates protection and filtration to all back panel outlets. To turn the unit ON or OFF, press the upper or lower portion of this button. 2. - Page 5 REAR PANEL 7. POWER CORD Heavy duty 14-guage power cord for connection to the AC power mains (~115V/60Hz) 8. CIRCUIT BREAKER Resettable 15 amp thermal circuit breaker 9. 8 REAR PANEL OUTLETS EMI/RFI filtered, spike/surge protected and switched...
-
Page 6: Installation And Operation
1. The PCL Series conditioners are the perfect accessories for any rack mount system. Install in the top slot of a standard 19-inch rack, and the 8 switched AC outlets on the rear panel will provide full safety protection to all your rack equipment. -
Page 7: Specifications
8 standard 3-prong grounded AC receptacles Maximum 1800W/15A load ~120VAC/60 Hz 15A thermal type 5W (two) 19” X 1.75” X 7.3” (483 X 44 X 185mm), 1U rack height PCL-800 4.45 lbs (2.0 Kg) PCL-810 4.5 lbs (2.05 Kg) PCL-815 4.55 lbs (2.07 Kg)