Camera Picture Quality Setup; Camera Interrupt Setting (Display Off Mode); Front Camera Setup; Camera Input Setting - Alpine iLX-W690D Manual

Camera Picture Quality Setup

[Visual Adjust] is selected on the Camera Setup Menu
screen.
You can adjust the picture quality for the primary and
secondary cameras.
Setting item:
Visual Adjust
Adjusting Brightness
Setting item:
Brightness
Setting contents:
-15 to 15 (Initial setting: 0)
• You can adjust the brightness between MIN (-15) and MAX
(+15).
Adjusting Colour of Display
Setting item:
Color
Setting contents:
-15 to 15 (Initial setting: 0)
• You can adjust the colour between MIN (-15) and MAX
(+15).
Adjusting Display Contrast
Setting item:
Contrast
Setting contents:
-15 to 15 (Initial setting: 0)
• You can adjust the contrast between MIN (-15) and MAX
(+15).
Camera Interrupt Setting (DISPLAY
OFF Mode)
You can set whether to display the rear camera image when
the gear lever is moved to the reverse (R) position while the
unit is turned off.
Setting item:
Camera Interrupt (DISPLAYOFF Mode)
Touch [ ] (Off) or [
Interrupt (DISPLAYOFF Mode)".
] (On) of "Camera

Front Camera Setup

[Front Camera] is selected on the Camera Setup Menu
screen.

Camera Input Setting

[Camera Select] is selected on the Camera Setup Menu
screen.
Setting item:
Camera Select
Setting contents:
Off (Initial setting) / Front
Off:
No camera is connected.
Front:
Front camera is connected.

Camera Signal Input Setting

[Camera Signal] is selected on the Camera Setup Menu
screen.
When the camera is connected, the video input signal type
can be chosen.
Further setting item:
Camera Signal
Setting contents:
NTSC (Initial setting)/PAL
21
-EN