Starting Circuit Cut-Off System Operation - Yamaha CYGNUS RAY ZR 2022 Supplementary Service Manual

EAS30494

STARTING CIRCUIT CUT-OFF SYSTEM OPERATION

If the main switch is turned to "ON" and the start switch " " is pushed, the starter generator can only
operate if at least one of the following conditions is met:
• The front brake lever is pulled to the handlebar (the front brake light switch is closed) and the sides-
tand is up (the sidestand switch is closed).
• The rear brake lever is pulled to the handlebar (the rear brake light switch is closed) and the sidestand
is up (the sidestand switch is closed).
1. Battery
2. Main relay
3. Main fuse
4. Main switch
5. Backup fuse
6. Rear brake light switch
7. Front brake light switch
8. Start switch
9. Sidestand switch
10.SGCU (starter generator control unit)
11.Starter generator
12.Crankshaft position sensor
ELECTRIC STARTING SYSTEM
5-11
ELEC