Laser Safety; Installation Tools - H3C S5560S-SI Series Installation Manual

Item
Power receptacle and
cables

Laser safety

WARNING!
Disconnected optical fibers or transceiver modules might emit invisible laser light. Do not stare into
beams or view directly with optical instruments when the switch is operating.
The switch is Class 1 laser device.

Installation tools

No installation tools are provided with the switch. Prepare them yourself as required.
•
Flat-blade screwdriver
•
Phillips screwdriver
•
ESD wrist strap
•
Needle-nose pliers
•
Diagonal pliers
•
Crimping pliers
•
Marker
Requirements
For the operating voltage range, see S5130S-EI Switch Series Hardware
Information and Specifications.
•
If the external power supply system provides an AC power outlet, use a
country-specific AC power cord. Make sure the PE wire of the AC power
supply is grounded reliably.
•
If the external power supply system provides a DC distribution box, prepare
DC power cords yourself.
•
Do not use the power cord provided with the switch on other devices.
9