Warning And Safety Instructions; 1 General Information - Miele KF 18 Vi Series Technical Information

Technical Information
A

Warning and Safety Instructions

1 General Information
Danger!

These appliances are top-heavy and must be prevented from tipping
over. Follow the installation instructions.

Use a finger guard to prevent fingers from being jammed when the door is
opened.

Always wear safety glasses when working near the copper tubing and all
sealed system components.

Do not move the copper tubing or sealed system components if it's not
necessary.

Remove heavy objects from the drawers and shelves when servicing or
uninstalling the appliance.

On the electronic modules (e.g., the inverter, control electronic, power
electronic, LED control module), a voltage of over 300 volts can exist for
up to 30 seconds after disconnection from the power supply. Wait at least
60 seconds before touching electronic modules.

Components with sharp edges may stick out. Wear protective gloves and
goggles and use edge shields (mat. no. 05057680) to prevent cuts by
sharp-edged components.
Note:

All repairs should be performed by a trained technician in strict
accordance with national, state and local codes. Any repairs or
maintenance performed by unqualified personnel could be dangerous.
When servicing, modifying, testing or maintaining appliances, all
applicable laws, regulations and accident prevention guidelines must be
observed.

After work has been completed, a visual as well as an operational check
should always be performed.

After work has been completed, do a touch current measurement on
machines with a ground connection on all accessible conductive parts
that are not grounded.
8
KF 18xx/19xx