Table of Contents
Advertisement
Radio
Using the system
Switch between wavebands
Your radio is fitted with the wavebands FM and AM; to change the rocker switch
press for a long time.
A/F
In the ranges FM1/AM1 and FM2/AM2 there are each 6 memory spaces available, in
order to change, press the rocker switch
Searching for and storing radio stations
Manual search
›
Set the frequency of the desired radio station by pressing the rocker switch
or
.
Automatic station finding SEEK
›
The radio searches for the next radio station in the selected waveband by
pressing the rocker switch
or
Function SCAN
›
The radio station of the current waveband is briefly played (10 seconds) by
pressing the rocker switch
.
SCAN
›
This function is ended by pressing the rocker switch
current station is replayed.
Store station
›
After selecting the radio station, press the selection button
station should be stored and hold it pressed in until the radio station briefly
switches to mute and a brief signal sounds.
Automatic station finding with storing the radio stations
›
Press the
rocker switch. Automatic station finding is started during which
AS
the 6 stations with the strongest signal in the memory level FM2 and/or AM2
are stored. STORE is displayed on the display. This applies only to the wave-
bands FM2 and AM2.
When the process of storing the radio stations on the selection buttons
complete, you can press any selection button
tion.
briefly.
A/F
.
once again and the
SCAN
, on which the
13
to call up the desired radio sta-
13
Note
The stored radio stations of the current waveband are updated and stored once
again by repetitively pressing the rocker switch
RDS Function
Certain radio stations transmit additional text information - designated as radio
text.
Note
The text information must not be available to all radio stations.
■
Depending upon the quality of the received signal, the radio needs a specific
■
time, in order to correctly read all the illustrated characters.
Traffic information function
Activating/deactivating traffic reports
Press the
button and TP will be displayed. If a set radio station does not
TP
transmit traffic reports, the radio searches for a station that does. TP SEEK is dis-
played on the display.
If no radio station which transmits the traffic reports is found, NO TP is shown on
the display.
An incoming traffic report automatically interrupts the CD play function or listen-
ing to a radio station, which at that moment is not transmitting a traffic report.
INFO and Station name is shown on the display. At the end of the traffic report,
the radio automatically returns to the original play function.
The traffic information function is turned off by pressing the
the TP symbol goes out.
is
13
.
AS
button again and
TP
5
Radio
Advertisement
Table of Contents
