Masking Unwanted Area (Blanking; Adjusting Position And Clock; Zoom Position; Selecting Resolution - NEC HT1000 User Manual

Masking Unwanted Area (Blanking)

This feature allows you to mask any unwanted area of the screen
image.
Adjust the Top, Bottom, Left or Right blanking with the SELECT
button.

Adjusting Position and Clock

This allows you to manually adjust the image horizontally and verti-
cally, and adjust Clock and Phase.
Horizontal/Vertical Position:
Adjusts the image location horizontally and vertically using the SE-
LECT and buttons. This adjustment is made automatically when
the Auto Adjust is turned on. See "Auto Adjust" on page E-41 for
turning on or off the Auto Adjust feature.
Clock .............. Use this item to fine tune the computer image or to
remove any vertical banding that might appear. This
function adjusts the clock frequencies that eliminate
the horizontal banding in the image.
Press the SELECT
ing disappears. This adjustment may be necessary
when you connect your computer for the first time.
This adjustment is made automatically when the Auto
Adjust is turned on.
Phase ............ Use this item to adjust the clock phase or to reduce
video noise, dot interference or cross talk. (This is
evident when part of your image appears to be shim-
mering.) Use the SELECT
the image.
Use "Phase" only after the "Clock" is complete. This
adjustment is made automatically when the Auto Ad-
just is turned on.

Zoom Position

When "4:3" is selected in Screen Type:
Move the viewable
Zoom or V-Zoom
area up or down
Move the position of
Cinema
an image up or down
When "16:9" is selected in Screen Type:
Move the viewable
Zoom
area up or down
Table of Availability for Zoom Position
For PC, DVD Progressive, 480p, 480i, 576p, 576i
Screen Type
Normal Full
4:3 Not available
16:9
Not available Not available
For 720p, 1080i, 1080p
Screen Type
Normal Full
4:3
Available
16:9
Not available
and buttons until the band-
and buttons to adjust
UP DOWN
UP DOWN
UP DOWN
Aspect Ratio
Zoom Cinema V-Zoom
Available Available Available
Available
Aspect Ratio
Zoom Cinema V-Zoom
Not available Available Not available

Selecting Resolution

This allows you to activate or deactivate the Advanced AccuBlend
feature.
or Auto ............... Turns on the Advanced AccuBlend feature. The pro-
Native ............. Turns off the Advanced AccuBlend feature. The pro-
NOTE:
* When "Resolution" is set to "Native", "3D Reform", "Aspect Ratio" and "Screen"
are not available.
* While you are displaying an image with higher resolution than the projector's
native resolution "Native" is not available.

Selecting Overscan Percentage

Select overscan percentage (0%, 5% and 10%) for signal.
NOTE: When "Resolution" is set to "Native", this feature is not available, and
the stored settings and adjustments are invalid.
NOTE: When "Stadium" is selected in "Aspect Ratio", this feature is not avail-
able.
NOTE: The "0%" option may not be available depending upon the input signal.
Selecting Video Filter Level (not available for Video, DVI, Compo-
nent 15kHz and Viewer)
This function reduces video noise.
Off .................. The filter is removed.
Less ............... The low-pass filter is applied partially.
More .............. The low-pass filter is applied fully.
Selecting Noise Reduction Level (not available for RGB, DVI and
Viewer)
Select one of the three levels for reducing video noise: Low, Medium
or High.
NOTE: The lower the Noise Reduction level, the better the image quality by
way of higher video bandwidth.

Selecting Signal Type

Select either the RGB signal type or the Component signal type.
RGB ............... RGB signal
Component .... Component signals such as Y/Cb/Cr, Y/Pb/Pr
NOTE: This feature is available on RGB only. If you do not get a better picture
even when you set "Signal Select" to "Component" in Setup, set this to "Com-
ponent".

Picture Management

This option allows you to adjust neutral tint for yellow, cyan or magenta.
There are 5 factory presets optimized for various types of images, or
you can set 4 user adjustable settings.
Stadium
Video ............. Recommended for regular picture such as TV pro-
Not available
Movie ............. Recommended for movie
Game ............. Recommended for playing a video game
Graphic .......... Recommended for graphics
Stadium
sRGB ............. Standard color values
User 1-4 ......... User adjustable
E-38
jector automatically reduces or enlarges the current
image to fit the full screen.
jector displays the current image in its true resolu-
tion.
See "Auto Adjust" on page E-41 for turning on or off
the Auto Adjust feature.
gram