Power Indicator; Using Power Management; Selecting A Video Source; Picture Size - NEC MultiSync V461 User Manual

Nec v461: user guide
Hide thumbs Also See for MultiSync V461:
Table of Contents

Advertisement

Power Indicator

Power ON
Power OFF
Power Standby when
"SCHEDULE" is enabled
Power Standby
Diagnosis (Detecting failure)

Using Power Management

The LCD monitor follows the VESA approved DPM Power
Management function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the display when the keyboard or the mouse has not been
used for a fixed period.
The power management feature on your new display has
been set to the "ON" mode. This allows your display to enter
a Power Saving Mode when no signal is applied. This could
potentially increase the life and decrease the power
consumption of the display.
NOTE: Depending on the PC and video card used, this
function may not operate.

Selecting a video source

To view a video source:
Use the input button to set [HDMI], [VIDEO1], [VIDEO2] or
[S-VIDEO].
Use the COLOR SYSTEM menu to set [AUTO], [PAL],
[NTSC], [PAL60], [4.43NTSC], [SECAM], according to your
video format.

Picture Size

DVI, VGA, RGB/HV
FULL
NORMAL
HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2
FULL
NORMAL
Aspect ratio
Unchanged view*
of image
4:3
Squeeze
*
1
Grey areas indicate unused portions of the screen.
Status
Green
Red
Red On
Green Blinking
Red, Green
Red Blinking
* See troubleshooting on page 29
CUSTOM
REAL
DYNAMIC
CUSTOM
REAL
1
Recommended selection
for picture size*
1
NORMAL
DYNAMIC
FULL
NORMAL: Displays the aspect ratio the same as it is sent
from the source.
FULL: Fills entire screen.
DYNAMIC: Expands a 4:3 pictures to fill the entire screen
with non-linearity. Some of the outside image area will be
cut off due to expansion.
CUSTOM (ZOOM)
The image can be expanded beyond the active display area.
The image which is outside of active display area is not
shown.
ZOOM
REAL: Image will be displayed 1 by 1 pixel.

Picture Mode

DVI, VGA, RGB/HV
STANDARD
HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2
STANDARD

Information OSD

DVI, VGA, RGB/HV
VGA
1024 x 768
48kHz 60Hz
AUDIO : 1
SIZE : FULL
DVD/HD
DVD/HD
60HZ
AUDIO : 2
SIZE : FULL
VIDEO
S-VIDEO
60HZ
NTSC
AUDIO : 3
SIZE : NORMAL
PIP or POP
Main: VGA
Sub: S-VIDEO
VGA
1024 x 768
48kHz 60Hz
AUDIO : 1
S-VIDEO
NTSC
60HZ
SIZE : FULL
English-17
ZOOM
sRGB
HIGHBRIGHT
CINEMA
HIGHBRIGHT
Video Input mode
)
Input signal Information
Audio input mode
Picture Size mode
Video Input mode
Audio input mode
Picture Size mode
Video Input mode
Input Signal Colour System mode
Audio input mode
Picture Size mode
Main picture information
)
Sub picture information
Main picture Size mode

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents