Table of Contents
Advertisement
15. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
15.1 Alarm Codes and Possible failures
The appliance does not start or it stops during operation. First try to find a solution to the
problem (refer to the tables).
WARNING!
Deactivate the appliance before carrying out any check.
With some problems, the display shows an alarm code and the
Start / Pause
If the appliance is overloaded, remove some items
from the drum and/or keep pressed the door while
touching the Start / Pause button until the indicator
Problem
The appliance does
not fill with water prop‐
erly.
button may flash continuously:
stops flashing (see the picture below).
Possible solution
•
Make sure that the water tap is open.
•
Make sure that the pressure of the water supply is not too low.
For this information, contact your local water authority.
•
Make sure that the water tap is not clogged.
•
Make sure that the inlet hose has no kinks, damages or
bends.
•
Make sure that the connection of the water inlet hose is cor‐
rect.
•
Make sure that the filter of the inlet hose and the filter of the
valve are not clogged. Refer to 'Care and cleaning'.
ENGLISH
43
Advertisement
Table of Contents
