Before First Use; Daily Use - AEG LR73R840 User Manual

2. Turn the programme knob to the third
programme.
3. Press and hold the Vlekken/Voorw. -
Taches/Prélav. and Plus Steam
buttons for some seconds (within 10
seconds after the switching on. After
these 10 seconds, the key
combination activates and
deactivates the acoustic signals).
4. The display will show
about 5 seconds.

11. BEFORE FIRST USE

1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour a small quantity of detergent
into the compartment marked

12. DAILY USE

WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the Aan/Uit - Marche/Arrêt
button for a few seconds to activate
the appliance.
A short tune sounds (if activated). The
appliance automatically proposes a
default programme. The relevant
indicator illuminates.
The display shows the maximum load,
the default temperature, the default spin
speed, the indicators of the phases
making up the programme and the cycle
duration.
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
for
4. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
.
4. Close the door firmly.
If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
CAUTION!
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
ENGLISH 23