Heatrae Sadia Multipoint ECO 30L V 3kW Installation, Operation And Maintenance Manual page 17

Mode Selection
Core modes: to move from one mode to another or to set the clock, short press
S
The selected mode or the set of the clock is validated by pressing the
Permanently monitors and learns hot water consumption habits and after a minimum of one
S
Smart Mode:
week learning period, automatically adjusts hot water production according to past recorded
consumptions. A minimum of hot water availability is guaranteed depending on the selected
level of comfort.
Manual Mode: Maintains the total volume of water at a temperature according to the selected temperature
Vacation mode: Keeps the water temperature at a minimum level avoiding any water freezing.
Set Time Mode: To set the current time in hours and minutes.
Installation
After installation of the water heater electrical power and water pipes have been connected, and after the tank is filled,
the installer can turn on the power. As soon as the power is on, all segments of the LCD display are set ON for a few
seconds.
After a few seconds of the test display, the unit goes in to
button
S
S
mode, level 4. The
button.
.
blinks while the water is heating.
l
17