1. Manuals
  2. Brands
  3. NANLUX Manuals
  4. Lighting Equipment
  5. Evoke 1200B
  6. Instruction manual

NANLUX Evoke 1200B Instruction Manual

Led bi-color spot light
Hide thumbs Also See for Evoke 1200B:
Table of Contents

Advertisement

Quick Links

USER MANUAL
Evoke 1200B
LED BI COLOR SPOT LIGHT
WWW.NANLUX.COM

Advertisement

Table of Contents
loading

Related Manuals for NANLUX Evoke 1200B

Summary of Contents for NANLUX Evoke 1200B

  • Page 1 USER MANUAL Evoke 1200B LED BI COLOR SPOT LIGHT WWW.NANLUX.COM...

  • Page 2: Table Of Contents

    Contents Product Diagram 2. CCT Button ........................3. EFFECT Button (effect types and operations) ....Technical Data ............4. MENU Button ............Product Details ........................ ①OUTPUT MODE ②ADDRESS/DMX ............. Detailed Description ..........③WIRELESS CONTROL ..........Usage ④FAN CONTROL ............

  • Page 3: Product Diagram

    Evoke 1200B LED Bi-Color Spot Light Product Diagram Technical Data Rated power: 1200W Input voltage/current: DC48V/25A Max AC100-240V 50/60Hz Color Temperature: 2700K-6500K CRI: Average 96 TLCI: Average 97 ta=45℃...

  • Page 4: Product Details

    Product Details 1. Quick Release Device 2. NL Mount 11. Fixture Body Handle 12. Kipp Handle 6. Display 7. Functions Buttons 13. Right Knob 8. Left Knob 3. Lock Catch 14. Wire Control 4. Eye Bolt Socket 9. USB Port 15.DC IN 5.

  • Page 5: Detailed Description

    22. Power Supply Handle 17. Power Supply Hanging Hole 24. Reflector 18. DC Power Output Socket 23. COB Protective Cap 19. LED Indicator 20. Power Switch 21. AC Power Input Socket Detailed Description 1. Quick release device: For quick installation and detachment of yoke. 2.

  • Page 6: Usage

    22. Power supply handle: For lifting the power supply. 23. COB protective cap: For protection purpose, please cover the COB with the cap when not in use. (Note: Take off the cap before using.) 24. Reflector: For concentrating light to improve the central illumination. Usage 1.
  • Page 7 ▲Note: 1. When connecting the power supply, please make sure the power, voltage and frequency are consistent with that indicated on the included power supply. 2. Make sure to use the included power supply and power cable. The connection between the DC plug and the DC IN power input socket on the fixture should be connected as below shown.

  • Page 8: Installation And Detachment Of Yoke

    2. Installation and Detachment of Yoke ① Quick release yoke diagram Quick release plate Quick release plate mount Quick release lever lock catch Quick release lever The side with kipp handle The side with damping...
  • Page 9 ② Installation of Yoke (Method One) Lay down the light fixture on flat ground, with its Press the quick release lever lock catch to release bottom up. the lever, and push the lever aside. Align and insert the quick release plates to the Note: Please adjust the plate to right directions Firmly hold the yoke in place with one hand, and mounts on both sides of the fixture.
  • Page 10 Mount the fixture on heavy-duty light stand and When disassembling the yoke, remove the fixture Press the quick release lever lock catch of the lock the fastening screws on the light stand. from the heavy-duty light stand first and lay it down fixture on both sides, then release the quick on flat ground.
  • Page 11 ③ Installation of Yoke (Method Two) Mount the yoke on heavy-duty light stand and lock Press the quick release lever lock catch and push Pull the levers on both sides of the fixture to lock the lever aside, align and insert the quick-release the fastening screws on the light stand.

  • Page 12: Installation And Detachment Of Reflector

    3. Installation and Detachment of Reflector When installing the reflector, align the reflector’s bayonet lock to the light’s mount, rotate the reflector clockwise and fasten the reflector on the light. (Note: if the rotation is not smooth, pull the lock catch of the mount and rotate the reflector at the same time.) When removing the reflector, pull the lock catch of the mount, rotate the reflector anticlockwise and remove.

  • Page 13: Installation And Detachment Of As-Cp-Qr-Ev Quick

    4. AS-CP-QR-EV Evoke Quick Release Clamp Installation Rotate the kipp handle to release the clamp. Mount the quick release clamp on the light stand, then rotate the kipp handle to tighten the clamp. Align the quick release plate on the power supply with the quick release mount Press the lock catch on the clamp to remove the power supply from the light on the clamp, a click sound will be heard when the power supply is fastened in stand.

  • Page 14: Address/Dmx

    Operating Instructions ·Evoke 1200B supports remote control via 2.4G, DMX/RDM and LUMENRADIO, and includes a built-in Bluetooth module as well. ▲The ADDRESS needs to be set before operating the remote control via 2.4G, DMX/RDM and LUMENRADIO. 1. ADDRESS/DMX, including ADDRESS, DMX MODE, DMX REDUCED CHANNELS, DMX DIMMING CURVE and DMX SMOOTHING settings.
  • Page 15 MENU MENU CH: 512 ADDRESS DMX MODE ADDRESS DMX REDUCED CHANNELS DMX DIMMING CURVE DMX SMOOTHING SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the ''right knob'' to ADDRESS, press the ''right knob'' to enter the corresponding tertiary menu. MENU MENU ADDRESS...
  • Page 16 ② DMX MODE MENU MENU CH: 512 CH: 512 ADDRESS CCT 8bit DMX MODE CCT 16bit DMX REDUCED CHANNELS ULTIMATE DMX 8bit DMX DIMMING CURVE DMX SMOOTHING SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the ''right knob'' to DMX MODE and press the ''right knob'' to enter the corresponding tertiary menu. MENU MENU CH: 512...
  • Page 17 ③ DMX REDUCED CHANNELS MENU MENU CH: 512 CH: 512 ADDRESS DMX MODE DMX REDUCED CHANNELS DMX DIMMING CURVE DMX SMOOTHING SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the ''right knob'' to DMX REDUCED CHANNELS, and press the ''right knob'' to enter the corresponding tertiary menu. MENU MENU CH: 512...
  • Page 18 ④ DMX DIMMING CURVE MENU MENU CH: 512 CH: 512 ADDRESS LINEAR DMX MODE EXPONENT DMX REDUCED CHANNELS LOGARITHM DMX DIMMING CURVE S CURVE DMX SMOOTHING GAMMA 2.2 SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the ''right knob'' to DMX DIMMING CURVE, and press the ''right knob'' to enter the corresponding tertiary menu. MENU MENU CH: 512...

  • Page 19: Dmx Control

    ⑤ DMX SMOOTHING MENU MENU CH: 512 CH: 512 ADDRESS DMX MODE DMX REDUCED CHANNELS DMX DIMMING CURVE DMX SMOOTHING SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the ''right knob'' to DMX SMOOTHING and press the ''right knob'' to enter the corresponding tertiary menu. MENU MENU CH: 512...
  • Page 20 ADDRESS Setting. ④ Refer to the attached DMX reference guide and control the light via DMX/RDM console. (For specific operation methods, please refer to the DMX/RDM console operation manual.) Note: DMX reference guide《Evoke 1200B DMX REFERENCE GUIDE》please download it from www.nanlux.com.

  • Page 21: Wireless Control

    3.WIRELESS CONTROL ① BLUETOOTH SETTINGS The Evoke 1200B has built-in Bluetooth connection functionality, so it can be controlled via Bluetooth module. MENU MENU CH: 512 CH: 512 OUTPUT MODE BLUETOOTH SETTINGS ADDRESS/DMX 2.4G SETTINGS WIRELESS CONTROL LUMENRADIO SETTINGS FAN CONTROL...
  • Page 22 MENU MENU CH: 512 CH: 512 BLUETOOTH ON/OFF RESET BLUETOOTH SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the "right knob" to BLUETOOTH ON/OFF, and press the "right knob" to enter the corresponding next level menu. MENU MENU CH: 512 CH: 512 SMART SMART...
  • Page 23 ·The RESET BLUETOOTH is available when the Bluetooth is on. MENU MENU CH: 512 CH: 512 BLUETOOTH ON/OFF RESET BLUETOOTH RESET BLUETOOTH BACK RESET SMART PRESS “MENU” TO SMART PRESS “MENU” TO Rotate the "right knob" to RESET BLUETOOTH, and press the "right knob" to enter the corresponding next level menu. MENU MENU CH: 512...
  • Page 24 ② 2.4G SETTINGS ·Evoke 1200B can be remotely controlled by 2.4G remote controller or NANLINK transmitter box. Note: (1) 2.4G remote controller and NANLINK transmitter box are sold separately. (2) The fixture supports the 2.4G wireless protocol V1.0 and V2.0. The fixture should be set in V2.0 while using WS-RC-C1 or WS-RC-C2 remote controller, set in V1.0 while using other remote controllers.
  • Page 25 MENU MENU CH: 512 CH: 512 SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the "right knob" to select ON or OFF, and press the "right knob" to set. The 2.4G wireless control is available when the 2.4G is set to be on. MENU MENU CH: 512...
  • Page 26 Rotate the "right knob" to select V1.0 or V2.0, and press the "right knob" to set. ③ LUMENRADIO SETTINGS ·Evoke 1200B has built-in CRMX TIMOTWO module, enabling it to receive and send CRMX wireless DMX signals. The specific operations are as below: press MENU to enter the interface. MENU...
  • Page 27 MENU MENU CH: 512 CH: 512 OUTPUT MODE BLUETOOTH SETTINGS ADDRESS/DMX 2.4G SETTINGS WIRELESS CONTROL LUMENRADIO SETTINGS FAN CONTROL ALL WIRELESS ON/OFF ROTATE SCREEN SCREEN BRIGHTNESS SMART SMART PRESS “MENU” TO Rotate the "right knob" to WIRELESS CONTROL, and press the "right knob" to enter the corresponding secondary menu. MENU MENU CH: 512...
  • Page 28 MENU MENU CH: 512 CH: 512 LUMENRADIO ON/OFF RADIO MODE UNLINK SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the "right knob" to LUMENRADIO ON/OFF, and press the "right knob" to enter the corresponding next level menu. MENU MENU CH: 512 CH: 512 SMART...
  • Page 29 (1) RECEIVER MODE RATIO MODE Setting MENU MENU CH: 512 CH: 512 LUMENRADIO ON/OFF RECEIVER MODE RADIO MODE TRANSMITTER MODE UNLINK SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the "right knob" to RADIO MODE, and press the "right knob" to enter the next level menu. MENU MENU CH: 512...
  • Page 30 UNLINK Setting MENU MENU CH: 512 CH: 512 LUMENRADIO ON/OFF RADIO MODE DO YOU WANT TO UNLINK? UNLINK SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the "right knob" to UNLINK, and press the "right knob" to enter the next level menu. MENU MENU CH: 512...
  • Page 31 (2) TRANSMITTER MODE Set the fixture to TRANSMITTER MODE, and connect with the DMX/RDM console. MENU MENU CH: 512 CH: 512 LUMENRADIO ON/OFF RECEIVER MODE RADIO MODE TRANSMITTER MODE UNLINK SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the "right knob" to RADIO MODE, and press the "right knob" to enter the next level menu. MENU MENU CH: 512...
  • Page 32 The fixture can set the RF OUTPUT POWER when it is in TRANSMITTER MODE, the setting methods are as below: MENU MENU CH: 512 CH: 512 20dBm LUMENRADIO ON/OFF 16dBm RADIO MODE 11dBm RF OUTPUT POWER 5dBm LINK SMART SMART PRESS “MENU”...
  • Page 33 (4) Connect the fixture set in TRANSMITTER MODE with the fixture set in RECEIVER MODE. In TRANSMITTER MODE, the signal from the DMX/RDM console or DMX-based APP will be transmitted to the fixtures set in RECEIVER MODE. The fixtures set in TRANSMITTER MODE should be set as below: MENU MENU CH: 512...
  • Page 34 ④ ALL WIRELESS ON/OFF MENU MENU 菜单 CH: 512 通道：512 CH: 512 OUTPUT MODE BLUETOOTH SETTINGS 蓝牙设置 ADDRESS/DMX 2.4G SETTINGS 2.4G设置 WIRELESS CONTROL LUMENRADIO SETTINGS LUMENRADIO设置 FAN CONTROL ALL WIRELESS ON/OFF 所有无线开关 ROTATE SCREEN SCREEN BRIGHTNESS SMART SMART PRESS “MENU” TO 按“MENU”键...

  • Page 35: Rdm Control

    Control the fixture via a console with RDM function. (For specific operation instruction, please refer to the RDM console operation manual.) Note: The UID format of the fixture is as follows: 0008 XXXX XXXX Serial number 0502：Evoke 1200B Manufacturer: Nanguang...

  • Page 36: Operating Instructions

    1. First, make sure that the power switch of the control unit is in the "off" position. Now it is safe to connect the power adapter and power the unit on. If the power indicator is on that means the power supply is normal, the screen will display "NANLUX".
  • Page 37 2. CCT Setting: rotate the "right knob", clockwise to increase color temperature while counterclockwise to reduce the color temperature. The screen shows the CCT, range from: 2700K-6500K. CCT MODE CCT MODE CH: 512 CH: 512 2700K 0.0% 2700K 100.0% 6500K 6500K SMART SMART...

  • Page 38: Effect Button (Effect Types And Operations)

    Right knob SMART EFFECT MENU LOCK ·Evoke 1200B has built-in effects including: CCT LOOP, INT LOOP, FLASH, PULSE, STORM AUTO, STORM MANUAL, TV, PAPARAZZl, CANDLE/FIRE, BAD BULB, FIREWORK, EXPLOSION AUTO, EXPLOSION MANUAL and WELDING. EFFECT MODE EFFECT MODE CH: 512...
  • Page 39 ① CCT LOOP CCT LOOP setting, rotate the "right knob" to select DIM, CCT, SPEED (range from: 2s -30s), and rotate the "left knob" to set the parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: CCT LOOP EFFECT: CCT LOOP DIM: 100.0% DIM: 100.0%...
  • Page 40 ② INT LOOP INT LOOP setting, rotate the "right knob" to select DIM, CCT, SPEED (range from: 2s -30s), and rotate the "left knob" to set the parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: INT LOOP EFFECT: INT LOOP DIM: 0.0% - 100.0% DIM: 0.0% - 100.0%...
  • Page 41 ③ FLASH FLASH setting, rotate the "right knob" to select DIM, CCT, INTERVALS (range from: 0.1s -10s) and FLASH RATIO (range from: 0% -100%), and rotate the "left knob" to set the parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: FLASH EFFECT: FLASH...
  • Page 42 ④ PULSE PULSE setting, rotate the "right knob" to select DIM, CCT and PULSES/MIN (range from: 1-240), and rotate the "left knob" to set the parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: PULSE EFFECT: PULSE DIM: 100.0% DIM: 100.0% CCT: 5600K...
  • Page 43 ⑤ STORM AUTO STORM AUTO setting, rotate the "right knob" to select DIM, CCT, INTVL RANGE (range from: 1s -60s), and rotate the "left knob" to set the corresponding parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: STORM AUTO EFFECT: STORM AUTO DIM: 100.0% DIM:...
  • Page 44 ⑥ STORM AUTO STORM AUTO setting, rotate the "right knob" to select DIM, CCT, and rotate the "left knob" to set the corresponding parameters, press the "right knob" to trigger the storm effect. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: STORM MANUAL EFFECT: STORM MANUAL...
  • Page 45 ⑦ TV setting, rotate the "right knob" to select DIM, CCT, CCT SHIFT (range from: 0K-3000K) and SPEED (range from: 1-100), and rotate the "left knob" to set the corresponding parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: EFFECT: TV DIM: 0.0% - 100.0% DIM: 0.0% -...
  • Page 46 ⑧ PAPARAZZI PAPARAZZI setting, rotate the "right knob" to select DIM, CCT and SPEED (range from:1-100), and rotate the "left knob" to set the corresponding parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: PAPARAZZI EFFECT: PAPARAZZI DIM: 100.0% DIM: 100.0% CCT: 5600K...
  • Page 47 ⑨ CANDLE/FIRE CANDLE/FIRE setting, rotate the "right knob" to select DIM, CCT and SPEED (range from: 1-100), and rotate the "left knob" to set the corresponding parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: CANDLE/FIRE EFFECT: CANDLE/FIRE DIM: 0.0% - 100.0% DIM: 0.0% - 100.0% CCT: 5600K...
  • Page 48 ⑩ BAD BULB BAD BULB setting, rotate the "right knob" to select DIM, CCT, INTENSITY (range from: 1-100) and SPEED (range from: 1-100), and rotate the "left knob" to set the corresponding parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: BAD BULB EFFECT: BAD BULB...
  • Page 49 ⑪ FIREWORK FIREWORK setting, rotate the "right knob" to select DIM, CCT, SPEED (range from: 1-100) and DECAY (range from: 1-100), and rotate the "left knob" to set the corresponding parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: FIREWORK EFFECT: FIREWORK DIM: 100.0%...
  • Page 50 ⑫ EXPLOSION AUTO EXPLOSION AUTO setting, rotate the "right knob" to select DIM, CCT, SPEED (range from:1-100) and DECAY (range from:1-100), and rotate the "left knob" to set the corresponding parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: EXPLOSION AUTO EFFECT: EXPLOSION AUTO DIM: 100.0%...
  • Page 51 ⑬ EXPLOSION MANUAL EXPLOSION MANUAL setting, rotate the "right knob" to select DIM, CCT and DECAY (range from: 1-100), and rotate the "left knob" to set the corresponding parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: EFFECT: EXPLOSION MANUAL EXPLOSION MANUAL DIM: 100.0% DIM:...
  • Page 52 ⑭ WELDING WELDING settings, rotate the "right knob" to select DIM, CCT, SPEED (range from: 1-100) and PAUSE (ON/OFF), and rotate the "left knob" to set the corresponding parameters. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: WELDING EFFECT: WELDING DIM: 0.0% - 100.0% DIM: 0.0% - 100.0%...

  • Page 53: Menu Button

    4. MENU Button: Press the MENU button to enter the interface of menu. MENU CH: 512 OUTPUT MODE ADDRESS/DMX WIRELESS CONTROL FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS Left knob Right knob SMART EFFECT MENU LOCK ·Rotate the "right knob" to select the options, press the "right knob" to enter the corresponding secondary menu, and rotate the "right knob" again to select the corresponding options and press the "right knob"...

  • Page 54: ②Address/Dmx

    MENU MENU CH: 512 CH: 512 MAX OUTPUT CONSTANT OUTPUT SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the "right knob" to select MAX OUTPUT or CONSTANT OUTPUT, and press the "right knob" to set. ② ADDRESS/DMX For more opreation details please refer to P12. ③...

  • Page 55: ⑤Rotate Screen

    MENU MENU CH: 512 CH: 512 SMART FULL SPEED LOW SPEED SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the "right knob" to select SMART, FULL SPEED, LOW SPEED and OFF, and press the "right knob"' to set. Note: When the fan is off, the built-in fan will stop working, and the maximum output of fixture is 10%. When the fan is in low speed, the maximum output is 50%. When the fan is in smart or full speed state, the maximum output is 100%.

  • Page 56: ⑥Screen Brightness

    MENU CH: 512 DO YOU WANT ROTATE SCREEN? SMART PRESS “MENU” TO Rotate the "right knob" to select YES or NO, and press the ''right knob'' to set. ⑥ SCREEN BRIGHTNESS MENU MENU CH: 512 CH: 512 OUTPUT MODE ADDRESS/DMX SCREEN BRIGHTNESS WIRELESS CONTROL FAN CONTROL...

  • Page 57: ⑦Button Backlight

    MENU MENU CH: 512 CH: 512 SCREEN BRIGHTNESS SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the ''right knob'' to select the screen brightness, and press the ''right knob'' to set. ⑦ BUTTON BACKLIGHT MENU MENU CH: 512 CH: 512 ADDRESS/DMX WIRELESS CONTROL FAN CONTROL...

  • Page 58: ⑧Language

    MENU MENU CH: 512 CH: 512 SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the ''right knob'' to select ON or OFF, and press the ''right knob'' to set. ⑧ LANGUAGE MENU MENU CH: 512 CH: 512 WIRELESS CONTROL ENGLISH FAN CONTROL 简体中文...

  • Page 59: ⑨Firmware Update

    MENU MENU CH: 512 CH: 512 ENGLISH 简体中文 已设置 SMART SMART PRESS “MENU” TO PRESS “MENU” TO Rotate the ''right knob'' to select ENGLISH or 简体中文, and press the ''right knob'' to set. ⑨ FIRMWARE UPDATE Turn off the fixture before making firmware update, connect a USB drive with the latest firmware file to the fixture, and turn on the fixture to make update. MENU MENU CH: 512...
  • Page 60 MENU MENU CH: 512 CH: 512 FOUND FIRMWARE V0.00.13 FIRMWARE UPDATED BACK UPDATE SMART SMART PRESS “MENU” TO Rotate the ''right knob'' to UPDATE, and press the ''right knob'' to make firmware update. The screen will show FIRMWARE UPDATED after the update is done and then the fixture will restart automatically.

  • Page 61: ⑩Version

    firmware, LANGUAGE and choose the FIRMWARE UPDATE FIRMWARE UPDATE option in the menu. www.nanlux.com VERSION SMART SMART PRESS “MENU” TO Rotate the "right knob" to VERSION, and press the "right knob" to check the current version.

  • Page 62: Safety Precautions

    Safety Precautions 1. Please check for possible damage caused in transit after opening the package. Please do not use if damage is found. And contact with the distributor or manufacturer as soon as possible. 2. Please do not use a power cable with damaged insulation. Please do not unplug too hard or drag the power cable directly. 3.

  • Page 63: Product Includes

    Powerful Daylight Evoke 1200 and Bi-color Evoke 1200B Thank you for choosing the Nanlux Evoke Series We are delighted that you have chosen our brand new Evoke series fixtures and are pleased to welcome you to the Nanlux Family of users.
  • Page 64 Version: V1 2022-08-08 +86-754-85751187 +86-754-85300887 info@nanlux.com Zhanglin,324,Dongli Chenghai Shantou Guangdong China Guangdong NanGuang Photo&Video Systems Co., Ltd...

Table of Contents