Page 1
Dream Collection Bed Assembly Guide Carefully unpack your frame. Do not use a knife to cut through packaging. Top tips, important safety information and recommendations Assembly: 2 person Required area: 2 x 2.5 metres Required tools: Cross head screw driver and Scissors Important: Please check that all the parts are present and read the instructions thoroughly before commencing with assembly and retain for future reference.
Page 2
Tips before you start: We recommend that all items are assembled close to the place they will be in use and on a protective surface to avoid any unnecessary movement or contact that may damage the product. For ease during assembly identify the parts required before commencing each step, taking care to avoid over-tightening the fittings as this may damage the furniture.
Page 3
Supplied Fittings SBF01-01C-21-08 Legs Centre Rail Headboard Side Rail Footboard Slats Spanner Slats Spacer 120-135mm 120-135mm 150-180mm 150-180mm Please check you have the correct fittings and read through before commencing with assembly Step 1 Unpack components and layout, ready for assembly...
Page 4
Step 2 Fit legs to headboard and foot- board, by inserting the thread into the hole and hand tighten- ing. Tip: Ensure the legs are straight before fully tightening. Step 3 Loosen M8 Nuts to the headboard and footboard in each corner. Step 4a Hook on side rails to headboard and...
Page 5
Step 4b Tighten all nuts with 13mm spanner (C) Step 5a a.Position the centre rail into the centre of the bed, slotting the wood at each end into the bracket mounted on the headboard and footboard. Step 5b Screw in 1 x 40mm wood screw (B) into the side of the bracket pilot hole, straight into the wood.
Page 6
You can carefully position the bed in its final position, before placing the mattress and bedding. Manufactured by: Serene Beds & Furniture Limited Unit 1A, The Hill Top Estate, Shaw Street, West Bromwich, B70 0TX, United Kingdom www.serene.co.uk Rev: 1 (07/2022)