Download Print this page

Advertisement

Quick Links

INSTRUCTIONS
INSTALLATION, USE AND MAINTENANCE
- Warning! Security of the fitting is guaranteed only with the appropriate use of the
following instructions: therefore it is necessary to preserve them.
- Warning! Before connecting to the main network, during assembly or
replacement of the product, make sure to disconnect the tension.
- Warning! This lighting fitting's flexible cable cannot be replaced. If the the cable is
damaged, the luminaire must be changed.
- Warning! The product has to be repaired only by professional technicians or by the
manufacturer.
- During the installation of the system scrupulously respect the current plant
standards. Scrupulously follow the polarity of the wires: phase-brown / neutral-blue
/ eart-yellow/green. The disregard of this requirement could generate small
functional defects. For outdoor installation we recommend the use of a two-pole
switch.
- The fitting should be used only if complete with its protection screen. TM: It's a
polycarbonate lens.
- For any replacement contact the manufacturing company.
- The fitting must be installed by a professional electrician.
- The fitting cannot be modified or tampered with in any way, any modification may
compromise security by making it dangerous. The manufacturer declines any
responsibility for the modified products.
- Class I fitting must be connected to the ground circuit of the electrical plant.
- Keep at least 1 m between the fitting and the illuminated surface.
- Fitting suitable for indoor and outdoor applications. Protection degree IP65.
- Fitting suitable for direct mounting on normally inflammable surfaces
- For use in environments where an accumulation of non-conductive dust on the
luminaire
- Warning! Risk of electric shock
CEILING KIT OPTIONAL
TM - LKITA00000100013
Power supply: 220-240V Ac 50/60 Hz
Power
Weight
Dimensions
Surface exposed to the wind
60 W
1 Kg
Ø193×97,3 mm
0,029 m²
Operating temperature: -40° +45°C
EN
INSTRUCTION
IINSTALLATION, USE AND MAINTENANCE
- Attention! La sécurité du projecteur est garantie uniquement avec l'utilisation
appropriée des instructions suivantes: vous devez donc les conserver.
- Attention! Avant de faire des connexions réseau, pendant l'assemblage ou le
remplacement du produit, assurez-vous que la tension a été supprimée.
- Attention! Le câble flexible de cet appareil ne peut pas être remplacé. Si le câble
est endommagé l'appareil doit être changé.
- Attention! L'appareil ne peut être réparé que par du personnel spécialisé ou par le
fabricant.
- Lors de l'installation du système, respectez scrupuleusement les normes en
vigueur. Suivez scrupuleusement la polarité des fils: phase-marron / neutre-bleu /
terre-jaune/vert. Le non-respect de cette exigence pourrait générer de petits défauts
de fonctionnement. Pour une installation en extérieur, nous recommandons
l'utilisation d'un interrupteur bipolaire.
- L'appareil doit être utilisé uniquement s'il est complet avec son écran de
protection. TM: c'est une lens en polycarbonate.
- Pour tout remplacement, contactez le fabricant.
- L'appareil doit être installé par un électricien professionnel.
- L'appareil ne peut être modifié ou altéré de quelque manière que ce soit une
modification peut compromettre la sécurité en le rendant dangereux.
- L'appareil de class I doit être connecté au circuit de terre de l'installation életrique.
- Maintenez au moins 1 m entre l'appareil et la surface éclairée.
1 m
- Appareil adapte pour une utilisation en intérieur et extérieur. Degré de protection IP65.
- Appareil adapte au montage direct sur des surfaces normalement inflammables.
- Suivez la procédure illustrée pour une installation correcte.
- Pour une utilisation dans des environnements où une accumulation de poussière
non conductrice peut être attendue
- Attention! Risque de chol électrique
CEILING KIT OPTIONAL
TM - LKITA00000100013
Voltage: 220-240V Ac 50/60 Hz
Puissance
Poids
0,007 m²
60 W
1 Kg
Insulation class: I
Température de functionnement: -40° +45°C
FR
1 m
Dimensions
Surface exposée au vent
Ø193×97,3 mm
0,029 m²
0,007 m²
Classe de protection: I
MODEL
TM
IP66
IT-Questo prodotto contiene una sorgente luminosa di efficienza energetica classe
EN-This product contains a light source of energy efficiency class
FR-Ce produit contient une source lumineuse de classe d'efficacité énergétiques
P06113000
EP s.p.a. Via del Commercio 1 - 25039 - Travagliato (BS) - ITALY
OUTDOOR
INDOOR
D
www.lanzini.it

Advertisement

loading

Summary of Contents for LANZINI TM

  • Page 1 - L'appareil doit être utilisé uniquement s'il est complet avec son écran de - The fitting should be used only if complete with its protection screen. TM: It’s a protection. TM: c’est une lens en polycarbonate. polycarbonate lens.
  • Page 2 Per installazione all’esterno si consiglia l’utilizzo di interruttore bipolare. - L’apparecchio deve essere utilizzato solo se completo del suo schermo di protezione. TM: trattasi di lente in policarbonato. - Per qualsiasi sostituzione contattare l’azienda produttrice. - L’apparecchio deve essere installato da un elettricista professionista.