Engineering Notation - Casio fx-82CW User Manual

Engineering Notation

You can convert the exponent part of a displayed calculation result value
to a power of ten that is a multiple of 3, and displays the result.
Example: Transform the value 1234 to engineering notation, shifting the
decimal mark to the right, and then to the left.
1. Input 1234, and then press
2. Perform the operation below to enter the ENG Conversion Mode.
• Entering the ENG Conversion Mode converts the calculation result to
engineering notation and causes
• In the ENG Conversion Mode, you can use
decimal point of the mantissa.
3. To exit the ENG Conversion Mode, press
• This exits the ENG Conversion Mode and causes
the display.
• You can also exit the ENG Conversion Mode by pressing
– [Mixed Fraction]
.
– [ENG Notation]
to appear to its right.
.
40
and to shift the
to disappear from
or .