Assembly And Use For The 2.15 L Pitcher - Ninja BL780C Manual

Assembly and Use for the 2.15 L Pitcher

Assembly
Fig. 1
Fig. 2
IMPORTANT: Make sure that the motor base is plugged
in for use.
1
Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Align and lower the Pitcher onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the "LOCK"
symbol on the motor base.
3
Rotate the pitcher clockwise as far as it will go to lock in
place. (Fig. 2)
4
The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
5 Holding the Total Crushing
the shaft, place it onto the drive gear inside the pitcher.
Ensure that the attachment is seated properly and is
standing upright. (Fig. 4)
NOTE: The blade will fit loosely on the drive gear.
Fig. 3a
Fig. 3b
Blade Assembly by the top of
™
6 Add the ingredients to the pitcher, making sure that they
do not exceed the highest measured marking line on the
side of the pitcher.
NOTE: If you need to add additional ingredients while the
appliance is processing, open the pour spout cap and
pour the ingredients in through the opening.
7
Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( ) will
flash and the motor will not work if the pitcher and lid
are not installed correctly. When the pitcher and lid are
installed properly, the power button ( ) will be solid,
indicating that the appliance is ready for use.
8
Holding the lid by the handle in the upright position, place
it on top of the pitcher aligning the arrow ( ) located on
the lid with the arrow ( ) located on the pitcher's handle.
(Fig. 5) Press the handle down until you hear a click.
www.ninjakitchen.com
Fig. 4
Fig. 5
10