SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS - N COIL
Outdoor unit
Required indoor
1,2
metering device
Defrost jumper pin setting
3,4,5
Indoor unit
AE18B
AE24B
AE30B
AE36(B,C)
AE42C
AE43C
AE48(C,D)
AE60C
AE60D
AVC18B
AVC24B
AVC30B
AVC36(B,C)
AVC42C
AVC48(C,D)
AVC49C
AVC60C
AVC60D
CF/CM/CU18(A,B)
CF/CM/CU24(B,C)
CF/CM/CU30(A,B,C)
CF/CM/CU36(B,C,D)
CF/CM/CU42(B,C,D)
CF/CM/CU48(C,D)
CF/CM/CU60(C,D)
CF/CM64D
Note: Some of the combinations shown in this table require advanced main air-circulating fan indoor products. For approved coil-only matches, see
the SYSTEM CAPACITY - With High Efficiency Motor Furnaces table.
1. For applications that require a TXV, use S1-1TVM*** series kit.
2. Approved orifice(s) are shipped with the outdoor unit.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower time delay.
4. Do not use CF coils in horizontal applications.
5. Charge adders shown above do not indicate that coils are rated for every application. See the Performance Data tables for actual performance for specified system