Advertisement
Quick Links
Advertisement
Summary of Contents for N-BIOTEK NB-101SRC
- Page 1 Operation Manual Model : Orbital Shaker With Remote Control...
- Page 2 Index: I. General Information II-1. Introduction II-2. Installation II-3. Specifications II-4. Features III-1, Operation III-2. Platform Installation III-3. Error Messages III-4. Maintenance IV-1. Service and Contact...
- Page 3 I. General Information NOTE : Before operating Mini shaker with remote control, please take a few minutes to familiarize yourself with the contents of this manual. Thank you for purchasing Mini shaker with remote control. This operations manual contains instructions for the care of this Instrument. In order to use the instrument properly, please read this manual carefully before operation.
- Page 4 II-2. Installation - Choose a location that is free from rapidly changing temperature conditions (away from a heating or cooling vent). - To assure proper ventilation, allow a minimum of 5 Cm of the clearance between the rear and side of the unit and the adjacent wall. - Always ensure that the machine is installed on a level surface.
- Page 5 - Place the remote control box out of incubator or instrument which the shaker is placed in. Locate remote box at flat surface like a table near incubator, top of incubator or attach remote box on the wall of incubator, chamber with magnets. Or remote box can be hung by included plastic strap which can be installed into vent hole of remote box like photos below.
- Page 6 II-3. Specification II-4. Features 1) Constant Monitoring System (CMS) ensures precise control over speed 2) Extremely compact 3) Blushless DC motor and beltless drive system minimizes noise and vibration. 4) Digital control panel displays speed and time . 5) Wide variety of optional accessories available for most common laboratory vessels 6) In Incubator, convenient control without opening door 7) Indicator lamp for shaker run which is proportional to RPM speed...
- Page 7 III-1. Operation III-1.1 Control Shaker Start or Stop Shaker Run Indicator 5 Digit LED Display RPM/TIME selection Button Up & Down Buttons Setting/Save Buttons 1) Install the Shaker in the proper place of Incubator or any container. 2) Place the power switch (located on the rear of the controller) in the "ON" position (the display will illuminate).
- Page 8 mixing speed. Press the "SET" key located underneath the time/speed display. The set speed is displayed and will blink continuously. It can be adjusted by using the UP (▲) and DOWN (▼) keys. Once the desired speed is displayed, press the “SET” key to confirm.
- Page 9 IV-4. Service and Contact Service on Mini shaker with remote control should only be performed by qualified service personnel. To request service or technical support, please contact N-BIOTEK or your local N-BIOTEK representative. Ph: +82-32-321-2100 Fax: +82-32-328-2372 export@n-biotek.com Web: www.N-BIOTEK.com P.O.