Generating A New Preset - GE Vivid S70 User Manual

Hide thumbs Also See for Vivid S70:

Table of Contents

Generating a new preset

Vivid S70 / S60

BC092760-1EN 01

Delete the selected preset ('Deleting an application

preset' on page 12-93)

Only non-active unprotected user-defined application

presets can be renamed or deleted.

Move the selected preset up/down in the Application

Remove/Add the selected preset from/to the Application

Lock/Unlock the selected preset by user with

administrator rights.

Activate the selected preset.

Press Probe.

The Probe selection screen is displayed.

Any preset name which contains the GE tab in its top-right

corner (see example in Figure 12-68) is a "factory preset" which

cannot be modified.

Figure 12-68. Factory preset

To generate a new preset based on, for example, the

factory-preset "Cardiac_E":

1. Activate the system using factory preset Cardiac_E.

2. Modify desired imaging setting in any imaging mode.

3. Activate the Probe Selection screen.

4. Press Preset Config at the bottom of the preset list of the

selected probe.

5. Press Save/Create at the bottom.

6. Provide a name for the new preset.

7. Press Done.

The new preset appears at the top of the preset list and

becomes the default preset.

Note that the new preset button contains the name

Cardiac_E in its bottom right corner (Figure 12-69). This

allows you to identify the source for the new preset.

Application Presets List