Table of Contents
Advertisement
2.
Tear off two pcs battery adhesive liner.
Battery tape shown as in the figure.
// CAUTION //
Ensure Battery and its insulation are not
damaged (e.g. scratched, dented, punctured)
prior to and throughout assembly.
3.
Connect the battery connector to PCB.
/// WARNING ///
Failure to adhere to Safety Critical Note(s)
may increase risk of rupture, burning, or
failure to function safely when used by the
customer.
4.
Put the battery into the battery cave.
PAGE 49
07/16/2014
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
