Table of Contents
Advertisement
3 Controls and settings
2. Bluetooth test: You can use this option to test
the Bluetooth connection after your terminal
connects to a device.
3. Bluetooth info: It displays Bluetooth
information, including the local address, device
name and link address.
∙ WI-FI It has three options
1. Setting
(1) WI-FI SSID:
(2) Network: It is the same as computer
(3) Connect setting: Type "New IP" and "New
(4) System Scale: There are 3 Level to choose.
entering its Bluetooth MAC address.
a. Set by search: Search WI-FI signal in the
neighborhood.
b. Set by keyin: Type New SSID to connect
the WI-FI you prefer.
network. The Default is "Enable" DHCP to
auto get IP Address, Subnet Mask and
Gateway. Or you can "Disable" DHCP to set
your WI-FI data.
Port" to get connection.
The default is "High"
42
//Supervisor Menu
Advertisement
Table of Contents
