Download Print this page

RACK IT UP MPW-09 Manual

Wall bar & wood shelf

Advertisement

Quick Links

Wall Bar & Wood Shelf
IMPORTANT!
Enclume Design Products is committed to the highest quality in the manufacture of this RACK IT UP! pot rack.
The components of each rack are carefully inspected before shipment.
However, in case there is a problem, PLEASE LET US HELP YOU FIRST. Do not return the item to where you
purchased it. First, call us and explain what is missing or wrong. We will do our best to help with any question or
problem you have—and as fast as possible.
Call us TOLL FREE 1 (877) 362-5863 and ask for customer service. Thank you!
TOOLS NEEDED
-
We provide all tools required for assembly (except drill for predrilling wood shelf), hex wrench, and fastener
hardware (nuts, bolts). Note under attaching instructions on page 3 of this booklet, the list of tools you will need
to provide (plus 1/8" drill bit for wood shelf).
This product is warranted to be free of material defects for a period of five years from the date of purchase. Your exclusive
remedy is the repair or replacement of the defective product, and shall be subject to the following conditions: (1) You send
a notice of any defect to Enclume within the warranty period, and (2) You return the defective product, to Enclume
Design Products, 24 Colwell Street, Port Hadlock, WA 98339, postage prepaid, within 20 days following receiving a
return authorization number. (A return authorization number may be obtained from Enclume by calling the number at the
bottom of this booklet.) There are no other warranties expressed or implied. There are no warranties of merchantability or
fitness for a particular purpose. Enclume specifically disclaims any and all incidental or consequential damages arising out
of purchase, installation or use of this product.
MPW-09
RACK IT UP! 5-Year Limited Warranty
RACK IT UP! ™ is a trademark of Enclume Design Products
All rights reserved. Made in China. Packed in the U.S.A.

Advertisement

loading

Summary of Contents for RACK IT UP MPW-09

  • Page 1 MPW-09 IMPORTANT! Enclume Design Products is committed to the highest quality in the manufacture of this RACK IT UP! pot rack. The components of each rack are carefully inspected before shipment. However, in case there is a problem, PLEASE LET US HELP YOU FIRST. Do not return the item to where you purchased it.
  • Page 2 How To Assemble Your Pot Rack TIP! SAVE TIME AND HASSLE. PLEASE READ ENTIRE INSTRUCTIONS BEFORE BEGINNING ASSEMBLY. MISSING A PART? Please call our TOLL FREE SERVICE CENTER 1 (877) 362-5863 PAINTABLE - Want a different color? The finish on this pot rack can be spray painted any color. We recommend Rustoleum “Hammered”...
  • Page 3 STEP 3: SQUARE POT RACK ON TABLE Place assembled rack squarely on table and adjust all parts to be certain they are level and straight. Then tighten all bolts firmly. Now measure the distance between holes center to center at tops of brackets and note for later use when you install (see instal- lation instructions below).
  • Page 4 Wall Bar & Wood Shelf Installation of Drywall Anchors TOGGLER® brand SNAPTOGGLE® Toggle Bolt Installation Instructions DO NOT attempt to test the snaptoggle as you will be unable to use them. Should you need additional snaptoggles, you may purchase them at Lowes or find a local resource on toggler.com.