Toshiba Satellite R10 Series Resource Manual page 41

Positioning the disc in the sample drive
7 Gently press the disc onto the center spindle until you
feel it click into place.
8 Make sure the disc is completely on the spindle and is
lying flat on the tray.
9 Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
You are ready to use the disc.
Removing a disc with the computer on
1 Locate and press the eject button.
The disc tray partially opens.
2 Grasp the sides of the disc tray and pull it fully open.
3 Remove the disc from the disc tray and place it in its
protective cover.
Using the DVD-ROM or multi-function drive
Handle DVDs and CDs carefully, making contact only with the center
hole and edge. Do not touch the surface of the disc. Do not stack
discs. If you incorrectly handle the discs, you could lose data.
If you insert the disc incorrectly, it may jam the drive. If this happens,
contact your network administrator for assistance.
Never press the eject button while the computer is accessing the
drive. Wait for the disk/disc activity light on the system indicator
panel to turn off before opening the disc tray.
41