Parts Of Lubrication System (Golf, Golf Plus, Touran); Assembly Overview - Oil Pump, Sump - Volkswagen Golf 2004 Workshop Manual

2 Parts of lubrication system (Golf, Golf
Plus, Touran)
Caution
Finding metal shavings or a large quantity of small metal par‐
ticles during engine repair could indicate that the crankshaft
bearings or conrod bearings are damaged. To prevent this
from causing further damage, perform the following repairs:
Thoroughly clean oil channels.
Renew oil cooler
Renew oil filter element

Assembly overview - oil pump, sump

Removing and installing sump
2.1 Assembly overview - oil pump, sump
1 - 15 Nm
2 - Sealing flange
❑ With seal.
❑ Must be positioned on
dowel sleeves.
❑ Removing and installing
⇒ page 35 .
❑ Install with silicone seal‐
ant -D 176 404 A2- .
❑ Do not additionally oil or
grease the oil seal seal‐
ing lip.
❑ Before installing, re‐
move oil residue from
crankshaft journal using
a clean cloth.
3 - Chain tensioner with ten‐
sioning rail, 15 Nm
❑ When installing, preten‐
sion spring and fit.
4 - Oil dipstick
❑ The oil level must not be
above the max. mark!
❑ Markings ⇒ page 86
5 - Dipstick guide
6 - Guide tube
7 - Dowel sleeves
8 - O-ring
❑ Renew.
9 - 15 Nm
10 - Suction line
❑ Clean strainer if soiled.
Golf 2004 ➤ , Golf Plus 2005 ➤ , Passat 2006 ➤ , Touran 2003 ➤
4-cylinder diesel engine (2.0 l engine, 4 valve) - Edition 02.2011
⇒ page 87
⇒ page 89 .
.

2. Parts of lubrication system (Golf, Golf Plus, Touran)

87