Ninja Foodi NeverDull Quick Start Manual

What's in the Box
8" Chef
3.5" Paring
Knife Block
Chef Knife
Santoku Knife
Utility Knife
Paring Knife
Shears
Steak Knives
Suction Cups
(Underneath Block)
Cleaning & Care
DO NOT place knives in dishwasher.
Dishwashing your knives can decrease the
quality of the knife, damage the blade edge,
and reduce the stainless steel integrity. The
Shears come apart for easy hand washing.
For best results, clean stone
Wipe knife
sharpening wheel every 6 months with
block to clean.
running water and a soft bristle brush.
© 2021 SharkNinja Operating LLC. FOODI, NEVERDULL, and NINJA are trademarks of SharkNinja Operating LLC.
K32010A_QSG_MP_Mv1
7" Santoku 5" Utility
(4) 4.5" Steak Shears
Sharpening Slot
Sharpener Lever
Stone Sharpening
Wheel Access Door
Dry knives thoroughly before
storing to prevent watermarks
and spotting. DO NOT touch
sharp edge of knife.
Repeat sharpening
steps for each clean
knife every 2 weeks.
Please make sure to read the enclosed Use and Care Guide prior to using your unit.
Sharpening Guide
Knives arrive sharp. Do not sharpen immediately. To maintain optimal
sharpness, follow the sharpening steps below at least every 2 weeks.
SHARPENING STEPS
1. Slide lever to bottom of knife block.
2. Insert clean Ninja knife into designated sharpening slot until the blade comes to
a hard stop.
LARGE HANDLE
Insert into upper sharpening slot
(Chef and Santoku Knives)
3. While holding the knife in place, slide lever all the way up and down 10 times.
A slight click will be heard when the lever travels all the way to the bottom of
the block.
NOTE: Lever must travel full length of block to sharpen,
regardless of knife size, as shown here. The upstroke positions the
stone sharpening wheel and the downstroke sharpens the knife.
4. With lever all the way down, keep hands
away from the knife edge and carefully
remove the knife.
5. Rinse and dry knife thoroughly after
sharpening to remove metal shavings. If
knife has not been returned to preferred
sharpness, repeat steps above.
Quick Start
Guide
SMALL HANDLE
Insert into lower sharpening slot
(Utility, Steak, and Paring)
SCAN & WATCH
HOW IT WORKS
qr.ninjakitchen.com
/neverdull