Introduction - Motorola L3000 User Manual

INTRODUCTION

This manual (L3000E) is a supplement to the Motorola Digital
Communicator L3000 User's Guide. It explains advanced features
that are available on your portable.
This manual explains how the radio works when it ships from the
factory. Many features are programmable by your organization. Be
sure to refer to your organization's instructions to find out the differ-
ences.
This Supplement explains the following Advanced Dispatch Fea-
tures:
Multi-Simultaneous Talkgroup Scan
This feature allows you to monitor more than one talkgroup within
your fleet.
Status Message
Status Message - Allows you to send a Status Message to the dis-
patcher, or to the target ID of your choice. Status Messages like "AT
LUNCH" and "EN ROUTE" can be programmed and sent. Up to
10 named (aliased) Status Messages are available per unit.
Emergency Group Call
Emergency Group Call - Provides priority access to talkgroup mem-
bers, and provides visible and audible indications of an emergency
condition. The emergency call will take place on a pre-programmed
emergency talkgroup or the last selected talkgroup (depending on
how the portable is programmed).
Isolated Site Operation (ISO)
ISO allows you to continue group call communications within a sin-
gle cell site when connectivity to the network is lost. This feature
does this by allowing the cell to operate in a local, one cell only
mode.
1