Table of Contents
Advertisement
EYESIGHT
Adaptive Cruise Control (ACC)
This system provides Cruise Control with the
ability to keep a safe distance from the car in
®
front of you. Using the EyeSight
camera, the
Adaptive Cruise Control function identifies
vehicles in front when traveling at speeds of
approximately 20 mph or greater and
manages the acceleration/deceleration of your
Subaru to maintain a set speed and distance.
Adaptive Cruise Control is turned on or off
using the Adaptive Cruise Control button on
the right side of the steering wheel (please
refer to page 90). Once the system is turned
on, a white Adaptive Cruise Control icon will
be displayed on the Combination Meter
Display (CMD).
To set Adaptive Cruise Control, push the "SET/-" switch on the right side of the steering
wheel. The CMD will indicate a target speed. This speed can be adjusted up or down using
the "RES/SET" switch (please refer to page 90).
When a vehicle in front of you is identified, a Lead Vehicle icon will be displayed on the
Combination Meter Display (CMD) and/or Multi-Function Display (MFD). You can change
the desired following distance from the lead vehicle by pressing the "Increase Distance" or
"Decrease Distance" buttons (please refer to page 90).
Conventional Cruise Control
Conventional Cruise Control maintains a
constant traveling speed you set, but it does
not adapt to the other vehicles in front of you.
To switch to Conventional Cruise Control,
press and hold the "Increase Distance" or
"Decrease Distance" buttons on the steering
wheel for approximately two seconds. The
Cruise Control indicator on the Combination
Meter Display (CMD) will change from the
Adaptive Cruise Control icon to the
Conventional Cruise Control icon.
88
Advertisement
Table of Contents
