Motorola DCT2000 User Manual page 32

TROUBLESHOOTING
Problem
No power
Remote control does not work
Poor audio quality
Possible Solution
Reconnect the power cord. Be sure the DCT 2000 is plugged into an outlet that is
always live.
Press on the remote control to ensure the remote control is in cable mode.
CABLE
Change the batteries in your remote control according to the instructions in the section,
"Installing Batteries."
Ensure that nothing is on the DCT 2000 or blocking a clear line of sight between it and
the remote control.
For best audio quality, use the remote control to set the DCT 2000 to approximately
75% of maximum volume level and then adjust the audio levels on the external devices.
2 8