Troubleshooting - Scotts S20200 Operator's Manual

STORING THE TRIMMER
 Remove the battery pack from the string trimmer.
 Clean all foreign material from the trimmer.
PROBLEM
Line will not advance when
using the auto-feed head
Grass wraps around shaft
housing and string head
Motor fails to start when switch
trigger is depressed
MAINTENANCE

TROUBLESHOOTING

POSSIBLE CAUSE
Line is welded to itself.
Not enough line on spool.
Line is worn too short.
Line is tangled on spool.
Cutting tall grass at ground
level.
Battery is not secure.
Battery is not charged.
For any questions about operating or maintaining your product,
call the help line — 1-877-243-2774!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.
10 — English
 Store in a place that is inaccessible to children.
 Keep away from corrosive agents such as garden chemi-
cals and de-icing salts.
Lubricate with silicone spray.
Install more line. Refer to Line Replacement earlier
in this manual.
Pull line while pressing button.
Remove line from spool and rewind. Refer to Line
Replacement earlier in this manual.
Cut tall grass from the top down to prevent wrapping.
To secure the battery pack, make sure the latches
on each side of the battery pack snap into place.
Charge the battery pack according to the instructions
included with your model.
CALL US FIRST
SOLUTION