Safety Decals - Echo BEAR CAT SC2170 Owner's Manual

1.6 SAFETY DECALS

See Section 1.7 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner's manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. Decals that need replacement must be applied to their original locations.
1
P/N 12175
KEEP HANDS AND FEET
OUT OF INLET AND DIS-
CHARGE OPENINGS
WHILE MACHINE IS
OPERATING TO AVOID
SERIOUS PERSONAL
INJURY. STOP AND
ALLOW MACHINE
TO COME TO A COMPLETE STOP BEFORE CLEARING
OBSTRUCTIONS.
2
P/N 12176
DO NOT INSERT
BRANCHES LARGER
THAN 3/4 INCH INTO
SHREDDER OR MA-
CHINE DAMAGE MAY
OCCUR.
5
P/N 14965-00
DO NOT OPERATE THIS EQUIPMENT
IN THE VICINITY OF BYSTANDERS. DO
NOT ALLOW CHILDREN TO OPERATE
THIS EQUIPMENT.
OBTAIN AND WEAR SAFETY GLASSES
AND USE HEARING PROTECTION AT ALL
TIMES WHEN OPERATING THIS MACHINE.
BEFORE INSPECTING
VICING ANY PART OF
CHINE, SHUT OFF POWER SOURCE,
DISCONNECT SPARK
FROM SPARK PLUG AND MAKE SURE
ALL MOVING PARTS HAVE COME TO A
COMPLETE STOP.
OR SER-
THIS MA-
PLUG WIRE
2 INCH CHIPPER/SHREDDER
3
P/N 12250
CHECK BLADE BOLTS
FOR PROPER TORQUE
AFTER EVERY 8 HOURS
OF OPERATION. CHECK
BLADES AND ROTATE
OR RESHARPEN DAILY
OR AS REQUIRED TO
KEEP BLADES SHARP.
REFER TO OWNERS MANUAL FOR INSTRUCTIONS. FAILURE
TO DO SO MAY CAUSE POOR PERFORMANCE, DAMAGE
OR PERSONAL INJURY AND WILL VOID THE MACHINE
WARRANTY.
4
P/N 14942-00
READ AND UNDERSTAND YOU OWNERS MANUAL
BEFORE OPERATING. IF OWNERS MANUAL WAS
NOT INCLUDED OR YOU HAVE ANY QUESTIONS,
PLEASE CALL 800.247.7335
(U.S.A.)
ALWAYS
DISCHARGE AREA WHEN OPERATING
THIS MACHINE. KEEP FACE AND BODY
AWAY FROM FEED AND DISCHARGE
OPENINGS.
WHEN
MATERIAL INTO CHIPPER, DO NOT
ALLOW
CANS
MATERIAL TO BE FED INTO CHIPPER
OR SHREDDER.
BEFORE INSPECTING OR SERVICING
ANY PART OF THIS MACHINE, SHUT
OFF POWER SOURCE, DISCONNECT
SPARK PLUG WIRE FROM SPARK PLUG
AND MAKE SURE ALL MOVING PARTS
HAVE COME TO A COMPLETE STOP.
SAFETY
OR 701.282.5520
STAND CLEAR
FEEDING SHREDDABLE
METAL, ROCKS, BOTTLES,
OR ANY OTHER FOREIGN
OF
3