Using Dtmf Tones; Monitoring Phone Use - Motorola V60 User Manual

Return to Voice Mode
To return to normal voice mode, select Voice from the
TTY Setup
menu as described on page 18.

Using DTMF Tones

You can send a number to the network as Dual Tone
Multi-Frequency (DTMF) tones during a call. Use DTMF
tones to communicate with automated systems that
require you to submit a PIN code or credit card number.
Activate DTMF Tones
You can set DTMF tones to Long , Short , or Off .
M
Find the Feature
Short
sends a short fixed-duration tone for each keystroke.
Long
sends each tone for as long as you hold down the
key. Short DTMF tones work with most automated
systems. Some systems (such as home answering
machines) may require long tones for proper activation.
Send DTMF Tones
Using the Keypad
Press the number keys to send the numbers as DTMF
tones during a call.
To send numbers as long tones, make sure that DTMF is
set to Long . During a call, enter any single short keystroke
to put the phone in DTMF mode, then send the required
numbers by pressing and holding each key in turn.
Sending Stored Numbers
During a call, highlight a number in the phonebook or
recent calls lists, then:
Press To
M
1 open the sub-menu
2 S
scroll to Send Tones
+
3 SELECT (
) send number as DTMF tones

Monitoring Phone Use

Viewing and Resetting Call Timers
Network connection time is the elapsed time from the
moment you connect to your service provider's network to
the moment you end the call by pressing
includes busy signals and ringing.
The amount of network connection time you track on
your resettable timer may not equal the amount of
time for which you are billed by your service provider.
For billing information, please contact your service
provider directly.
> More > Settings
> Other Settings
> Initial Setup > DTMF
O
. This time
To view a call timer:
Find the Feature
Select 1 of the following options:
Timer Description
Last Call
approximate time spent on last
dialed or received call
You cannot reset this timer.
Dialed Calls
approximate time spent on dialed
calls since the last time you reset
this timer
Received Calls
approximate time spent on
received calls since the last time
you reset this timer
All Calls
approximate time spent on dialed
and received calls since the last
time you reset this timer
Lifetime
approximate time spent on all
calls on this phone
You cannot reset this timer.
To reset the call timer:
Press To
+
1 RESET (
) reset the time (if available)
-
2 YES (
) confirm the reset
Using a Timer During a Call
You can set a timer to beep at selected intervals and
display the elapsed time during a call.
M
Find the Feature
Select o1ne of the following Beep options:
Option Description
60 Seconds
Beep at 1-minute intervals during
a call.
Off
Do not beep during a call.
Select 1 of the following Display options:
Option Description
Time
Display the approximate elapsed
time for the current call.
Off
Do not display in-call timer.
M
> Recent Calls
> Call Times
> More > Settings
> In-Call Setup
> In-Call Timer
19