Group Connect Calls - Motorola Stature i9 User Manual

NNTN7530A_i9_Nextel_UG_Final_Draft.book Page 30 Friday, December 19, 2008 2:41 PM
Answering Direct Connect Calls
When you receive a Direct Connect call, your phone
emits a tone or vibrates. You then hear the voice of
your caller.
1. Wait for the caller to finish speaking.
2.
Press and hold the DC button. Continue as you
would on any Direct Connect call.
3. Press . to end the call.
A Direct Connect call ends automatically after there is
no activity on the call for several seconds.

Group Connect Calls

A Group Connect call is similar to a Direct Connect call
to one user, but is made to multiple Direct Connect
subscribers at once. You can create Groups from your
phone and call up to 20 other Group Connect-
compatible phones* anywhere on the Nextel National
Network. You can create a Group for one-time use or
store it to Contacts so you can call it at any time.
* Not all phones are Group Connect-compatible. See
www.nextel.com for more details on Group Connect.
30 3. Making and Answering Calls
Note In order to store Groups to your Motorola Stature i9
phone, you must use the 128K SIM card that came
with your phone. The 128K SIM card is labeled
"Nextel 600 Contcs & 25 Grps". With this SIM card, a
maximum of 25 groups can be added to your
Motorola Stature i9 phone. Group entries created
with your Motorola Stature i9 phone may not be
readable by older iDEN SIM-based phones.
Making Group Connect Calls
1. From Contacts or the Recent Calls list, highlight or
select a Group.
2. Press the DC button.
Tip You can also start a Group Connect call by entering
or selecting a Direct Connect number. See "Starting
a Group Connect Call With a Direct Connect
Number" on page 32.
Answering Group Connect Calls
Proceed as if answering a Direct Connect call from
one user. Only one person at a time may speak on
a Group Connect call.