Motorola ST130 User Manual page 43

   
    
How to Enter Alphabetic Characters
The 0, 1,... ...,8 and 9 keys are used to enter
alphabetic characters, for example when storing names in the
Phone Book or when creating messages.
For example, if you press 5, the first displayed character will
be J. If this is not the required character, then you can press the
same key again to show K. Another press will display L, another...
...will display 5. Your phone will continue to scroll through the
characters available on the selected key with each new key press.
A long press of any of the keys will switch all the characters to
lower case, a second long press will switch back to upper case.
To enter the next character press the appropriate key. If, however,
the next character is on the same key as the previous character
you will first need to press #. Pressing # a second time will
produce a space.
If you make a mistake, you can go back to the incorrect character
by pressing *.
Characters can be removed from the display by pressing C.
The character before the cursor ( Ú) is the character which will be
deleted.
Press O to store the information.
Available Characters
Press the appropriate keys to get the following characters:
1
Space . ? ! , Ÿ & : " ( ) ' ` @ % ¡ ¢ 1
Space . ? ! , Ÿ & : " ( ) ' ` @ % ¡ ¢ 1
2
A B C 2 [ ® ± ¼ ¾ ©
a b c 2 { ¯ ± ½ ¾ ©
3
D E F 3 ° ¿ ¤ ²
d e f 3 ° ¥ ¤ ²
4
G H I 4 À §
g h i 4 À
5
J K L 5 Á
j k l 5 Á
6
M N O 6 ] \ « ¨ µ
m n o 6 } | ¬ ¨ µ
7
P Q R S 7 Â ¾ ¸
p q r s 7 Â ¾ ¸
8
T U V 8 ¹ ^ ¦
t u v 8 ¹ ~ ¦
9
W X Y Z 9 º ·
w x y z 9 º ·
0
+ - 0 x * / = > < #
+ - 0 x * / = > < #
The top line for each key shows the upper case characters, the
lower line shows the lower case.
Using the Options Menu
41 English