Voice Commands - Motorola RAZR V3t User Manual

voice commands

You can use voice commands to make
calls, and perform some phone
functions.
Note: Not all languages support voice
commands. To see which languages support
voice commands on your phone, press
a > w Settings > Phone Status
> Voice Dial Languages.
voice dial a call
You can dial an entry in your phonebook by
speaking the entry's name, or dial any phone
number by speaking its digits.
Tip: Speak numbers at a normal speed and
volume, pronouncing each digit distinctly.
Avoid pausing between digits.
1 Press and release the voice key on the
right side of your phone. Your phone
prompts you to say a command.
2 Wait for the beep, then say "Name Dial. "
Your phone prompts you to say a name.
Say the name of an entry as it appears in
your phonebook. Your phone confirms the
name and makes the call.
or
Wait for the beep, then say "Digit Dial. "
Your phone prompts you to say a phone
number. Speak the digits. Your phone
confirms the number and makes the call.
Notes:
• Your phone may prompt you to repeat a
name or number.
• If your phone doesn't recognize the
name or number, it shows a list of
similar names/numbers, asks, "Did you
main attractions 35