Table of Contents
Advertisement
Other Operations
Programmed Playback
The program function enables you to store your
favourite files from any disc or USB device.
A program can contain 20 tracks.
1. Insert a CD or USB and wait for it to be order.
2. Press PROG. in stop status.
3. Press Y or U to select a track.
4. Press PROG. again to save and select a next
track.
5. Press T to play the programmed music files.
6. To clear your selection, press I twice.
,
Note
y The programs are also cleared when the
disc or USB device is removed, the unit is
switched to power off or the function is
switched to others.
y In case of program tracks over 20,
"PROGFULL" will flash up on the unit display.
Selecting a folder
1. Press Folder W/S repeatedly until desired
folder appear.
2. The first file in the folder will play.
Auto power down
This unit will turn off itself to save electric
consumption in the case were main unit is not
connected to external device and is not used for 25
minutes. So does this unit after six hours since Main
unit has been connected to other device using
analogue input.
CP3520-FU_ADEULLK_ENG.indd 13
Radio Operations
Listening to the radio
1. Press FUNC. until FM appears in the display
window.
2. Auto tuning :
Press and hold TUN (-/+) for about 2 seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit
tunes in a station.
Manual tuning :
Press TUN (-/+) repeatedly.
3. Adjust the volume by rotating VOL (-/+)
repeatedly.
Operating
13
3
2013-03-27
5:18:29
Advertisement
Table of Contents
