Activating Service; Powering On And Off - Motorola iDEN i530 User Manual

Iden digital multi-service data-capable phone
Hide thumbs Also See for iDEN i530:
Table of Contents

Advertisement

2 Remove the battery by pushing the battery toward
the antenna (using your thumb) and lifting it out.
Battery Use and Maintenance
• The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
• Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).
• Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If long
term storage is required, store at half capacity.

Activating Service

The first time you power on your phone, you must be
in your local calling area. This activates your
service.

Powering On and Off

To power your phone on:
1 Open the flip.
2 Press p.
To power your phone off:
1 Open the flip.
2 Press and hold p.
When You Power On for the First Time
The first time you power your phone on, screen may
appear asking you to update your browser
information. This means you must enable security.
If the Enter SIM PIN Code screen appears, enter
your SIM PIN. See "Entering the PIN" on page 11.
Press A under Ok.
When you receive your phone, the SIM PIN is 0000.
Change your PIN to prevent fraudulent use of the
SIM card (see "Changing the PIN" on page 11).
Activating Service
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

I530 - southernlinc

Table of Contents