Model Numbers and Specifications
Model Numbers
Before installing the controller, verify the correct model for local power requirements. The model number is on the
shipping label or on the product label inside the enclosure. Refer to the listing below and to
representation:
•
X13651534010, 120 Vac with outlet
•
X13651535010, 230 Vac with no outlet
Operating Environment Specifications
Make sure that the operating environment conforms to the specifications listed in Table 1.
Table 1.
Specifications
Temperature
Humidity
Power requirements
Power Output
Weight
Dimensions
Altitude
Installation
Pollution
X39641147-01B • Enclosure Installation Sheet
From 32°F to 122°F (0°C to 50°C)
5–95% non-condensing
120 Vac, 6A maximum, 1 phase, 50/60 Hz
230 Vac, 1 A maximum, 1 phase, 50/60 Hz
76 VA at 24 Vac
Mounting surface must be able to support 60 lb. (28 kg)
16 ½ in. × 14 ¾ in. × 5 ½ in. (418 mm × 373 mm × 140 mm)
6500 ft (2000 m) maximum
U.L. 840: Category 3
U.L. 840: Degree 2
Model Numbers and Specifications
Figure 3, p. 6
for a visual
2