Activating Service; Powering On And Off; Over-The-Air Programming - Motorola iDEN i205 User Manual

• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If long
term storage is required, store at half capacity.

Activating Service

The first time you power on your phone, you must be
in your local calling area. This activates your service.
See "Powering On and Off" on page 5 for information
on powering on your phone.
When you power on your phone for the first time,
enter 0000 if the Enter SIM PIN Code screen
appears. Press A under Ok.
You should change your SIM PIN code as soon as is
convenient. See "SIM Card Security" on page 10.
A screen may appear asking you to update your
browser information. Press A under Ok. See
"Over-the-Air Programming" on page 5.

Powering On and Off

To power your phone on:
1 Extend the antenna.
2 Press p.
3 If the Enter SIM PIN Code screen appears, enter
your SIM PIN. See "Entering the PIN" on page 10.
Press A under Ok.
Note: When you receive your phone, the SIM PIN
is 0000. Change your PIN to prevent
fraudulent use of the SIM card (see
"Changing the PIN" on page 10).
As your phone connects to the network, you will
see a welcome message and a connecting
message. When the idle screen appears, the
phone is ready to use.
To power the phone off:
1 Press and hold p.
2 Push down the antenna.

Over-the-Air Programming

If you are set up to receive over-the-air programming
from your service provider, you must enable security
the first time you power on your phone or within 20
days of first activation of your phone:
1 When you power on your phone for the first time,
after the idle screen appears, you will be prompted
to select Ok to update your browser information.
Note: If you press A under Later, you will be
prompted to enable security each time you
power on your phone until you press A
under Ok.
2 Press A under Ok.
Activating Service
5